3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Any idea where this vacuum line goes?

Thread Tools
 
Search this Thread
 
Old 06-02-04, 02:53 PM
  #1  
Senior Member

Thread Starter
 
Skele4door's Avatar
 
Join Date: Jan 2004
Location: Dallas, Tx
Posts: 288
Likes: 0
Received 0 Likes on 0 Posts
Any idea where this vacuum line goes?

I picked up a non-running 3rd gen a while back and have finally gotten around to tinkering with it. The question I have is if anyone knows where this vacuum line is supposed to go? It was located under the upper intercooler pipe and I cannot figure out where it should go. Thanks in advance. The 3rd pic is of the distribution block the vacuum line connects to right behind the alternator BTW. It is not the line with the breather on it, but the one directly below it.

Vacuum 1
Vacuum 2
Vacuum 3

Last edited by Skele4door; 06-02-04 at 02:55 PM.
Old 06-02-04, 02:57 PM
  #2  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
Links don't work. Do you have a factory service manual or a vacuum hose diagram to work from? If not, you should.

www.iluvmyrx7.com
http://www.autosportracetech.com/RX-7/vacuum.jpg
Old 06-02-04, 02:59 PM
  #3  
il Cosa Nostra e vivo!!

iTrader: (1)
 
areXseven's Avatar
 
Join Date: May 2003
Location: Dove le cose sono fatte il vecchio moda il senso
Posts: 2,097
Likes: 0
Received 0 Likes on 0 Posts
linky no worky.
Old 06-02-04, 03:07 PM
  #4  
Mr. Links

iTrader: (1)
 
Mahjik's Avatar
 
Join Date: Aug 2001
Location: Kansas City, MO
Posts: 27,595
Received 40 Likes on 26 Posts
Cut & paste the link shortcuts (they are Geocity links).
Old 06-02-04, 03:25 PM
  #5  
Senior Member

Thread Starter
 
Skele4door's Avatar
 
Join Date: Jan 2004
Location: Dallas, Tx
Posts: 288
Likes: 0
Received 0 Likes on 0 Posts
Oops, sorry about that. I never use geoshities and I forgot they don't allow direct linking.
Old 06-03-04, 11:19 AM
  #6  
Senior Member

Thread Starter
 
Skele4door's Avatar
 
Join Date: Jan 2004
Location: Dallas, Tx
Posts: 288
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the help guys, especially rynberg. That diagram should get me fixed up.
Old 06-03-04, 12:03 PM
  #7  
Rotary Enthusiast

 
speeddemon7's Avatar
 
Join Date: Jun 2003
Location: colorado
Posts: 1,400
Likes: 0
Received 0 Likes on 0 Posts
thats gonna suck.Because the broken nipple you show is the vacuum chamber.Expect little or no secondary boost.Get yourself a new vacuum chamber asap.Then expect to take the alternator out in order to get to the bastard.Good luck.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Kyo
2nd Generation Specific (1986-1992)
6
04-13-19 09:24 AM
dkwasherexd
Single Turbo RX-7's
21
05-27-17 04:51 AM
andyvideopro
General Rotary Tech Support
3
08-20-15 10:55 AM
pzr2
General Rotary Tech Support
1
08-15-15 08:29 PM



Quick Reply: Any idea where this vacuum line goes?



All times are GMT -5. The time now is 06:42 PM.