I have a 94(manual) with stock pulleys and no AP

so theres only 2 pulleys and the belt was shredded when it snapped.

so now I cant get the part number and every single belt I get is either 2 short or 2 long.

does anyone know the exact part number? or the exact length im looking for?


the belt that was closest was 29.2 inches i believe. IF thats accurate then a 30 inch or somewhere around that will fit perfectly.

PLEASE HELP Im stuck because of an alternator belt

 

banzai racing has a useful chart on all the different situations with stock and aftermarket belts.

http://banzai-racing.com/store/FD_poly-v_belts.html

I run the same way you do without the airpump. If the banzai link doesnt help, ill go look at the part number on my belt.

 

Hmmm i'm sort of confused since the belts that say underdrive main. Refer to the other pulley kits but does that include the stock pulley??

I'm runnning an ap delete with the altenator puey(stock I believe) and waterpump pulley. That's it.

But I don't have aftermarket pulleys. Did u buy ur belt from banzai?

 

I can't figure out how you ever had any belt contact on the waterpump with stock pulleys and no AP.
My guess is it shredded because it was slipping....badly. It's probably also be why Banzai doesn't show a belt with your combination.

You might consider an Airpump delete idler pulley. You can then use the stock belt and no issues with slippage.
Recent related thread ---> https://www.rx7club.com/3rd-generation-specific-1993-2002-16/larger-fuel-system-air-pump-question-880561/

 

That is exactly why we do not show a belt for that combination. Virtually no contact with the water pump pulley.