b@@sted_fd

what colour harness plugs into the air temp sensor under the intake manifold?

Mahjik

iTrader: (1)

https://www.rx7club.com/showpost.php...8&postcount=23

zack4173

iTrader: (3)

its the yellow one its easy its the only one the matches the other ones will not fit.

GARCO MOTORWORKS

My sensor is blue and the plug with the wires connected is black . I moved the sensor to the elbow and it may have changed color by itself .

Sgtblue

iTrader: (16)

I also moved the IAT to the intake elbow and it also turned the sensor blue and connector black. Mmmm...I think I'm starting to see a pattern here.

GARCO MOTORWORKS

Sgtblue ,lets move something else and see if it changes color as well . What do you think .

Sgtblue

iTrader: (16)

Well, once I unplugged my CRV. And after I plugged it back in, it looked like my BOV! Now you can hardly tell them apart. No...really.

b@@sted_fd

k guys, I have tried to plug all the connectors in and nothing will fit. I also can't find the connector for the fuel temp sensor. I'm going crazy here fellas.

katit

iTrader: (1)

Fuel temp and coolant temp connectors green and can be easily switched, so be careful

b@@sted_fd

yeah that's what I was told by someone else too but for some reason my coolant temp sensor is black. I have the green one just sitting there but it doesn't even remotely fit on the rectangular fuel temp sensor.

katit

iTrader: (1)

fuel temp sensor sitting on fuel rail between injectors.

Mahjik

iTrader: (1)

Sounds like you probably don't have the correct sensors in the correct spots. You should verify you have the correct sensors in the correct locations first.

b@@sted_fd

well I got the fuel temp sensor figured out. I was given an fc fuel temp sensor by accident. All fixed now. Got the air temp sensor figured out now too. The clip was hidden out of site and took some digging around. I now have one last electrical issue. Anyone know what color wire comes off the harness to the knock sensor connector?

GARCO MOTORWORKS

white wire , shielded