I am planning on removing my air pump what excatly do I need to do after removal , do I need any parts if so what are they any advice will be appericiated.

 

http://www.rx7.com/store/rx7/fdengine_accessories.html

"The GReddy Pulley Kit is designed to allow you to remove the air pump while retaining the factory main drive pulley. This works similar to our Triple Race Pulley Kit but does not included the main underdrive pulley. It is designed to work with the STOCK main pulley only. Two blue anodized pulleys replace the factory water pump and Alternator pulleys and a new belt is included. "

 

If you're going to remove the air pump, you might as well remove all the emissions junk. Look into a set of block offf plates from RX7store.net

 

just what other emmision crap is there to remove.

 

13BREW ACV
13BREW Split Air
13BREW AWS Pipe
13BREW AWS Solenoid
13BREW EGR Valve
13BREW ISC/BAC Solenoid
13BREW Double Throttle

 

whare would I find info on replacing these and what's needed.

 

 

As I said before, you'll need a set of block off plates, and you'll also need the "Search" button. This topic has been disussed before and there's tons of info on this forum.

 

thanks I will start looking

 

www.rotormafia.com