Air filter identification?
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: newark
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Air filter identification?
Hi everyone,
just need a little help, I have removed my air filter to wash the element (foam) however its all fellen to bits in my hand!!!!!! so I need a replacement foam!
But I have no idea what make the unit is? I have searched and searched but no results!
The unit runs the bov outlets to the back plate and the main inlets are one above the other also on the back plate. There are two blue wire mesh sections that the foam element is held between.
any ideas please check my photo link below
Many thanks
Adam K
http://i95.photobucket.com/albums/l1...K/PIC_0012.jpg
http://i95.photobucket.com/albums/l1...K/PIC_0011.jpg
just need a little help, I have removed my air filter to wash the element (foam) however its all fellen to bits in my hand!!!!!! so I need a replacement foam!
But I have no idea what make the unit is? I have searched and searched but no results!
The unit runs the bov outlets to the back plate and the main inlets are one above the other also on the back plate. There are two blue wire mesh sections that the foam element is held between.
any ideas please check my photo link below
Many thanks
Adam K
http://i95.photobucket.com/albums/l1...K/PIC_0012.jpg
http://i95.photobucket.com/albums/l1...K/PIC_0011.jpg
#3
Former Rotorhead
Join Date: May 2002
Location: Midland, MI
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
The fact that it fell apart in your hands is the exact reason why I would be replacing that with a normal paper style filter. Think what would have happened if the filter would have disintegrated into your intake...not good for the engine or the turbos.
#5
Mr. Links
iTrader: (1)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM