adding a driver oil cooler to the pass side.
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Lynchburg, VA
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
adding a driver oil cooler to the pass side.
I currently have 3 drivers oil coolers left from parting out cars. Im looking into putting one of them on the pass side and buying the lines to make it all work. I have no intention of buying dealer lines but making my own from the right fittings.
Does anyone with an R1 have any pictures in detail of your oil cooler on the pass side? does anyone know if this will work as easily as it seems. Im sure the biggest challenge is finding all the right fittings to make a reliable system. It seems to me all I have to do is take the return line from the drivers cooler and run it to the intake line on the pass cooler and then run off the pass oil cooler return line back into the engine.
if anyone has done this please let me know
if you have pictures of your r1 setup with the front bumper off.
send them to
gregory.denne@framatome-anp.com
thanks
Greg
Does anyone with an R1 have any pictures in detail of your oil cooler on the pass side? does anyone know if this will work as easily as it seems. Im sure the biggest challenge is finding all the right fittings to make a reliable system. It seems to me all I have to do is take the return line from the drivers cooler and run it to the intake line on the pass cooler and then run off the pass oil cooler return line back into the engine.
if anyone has done this please let me know
if you have pictures of your r1 setup with the front bumper off.
send them to
gregory.denne@framatome-anp.com
thanks
Greg
Thread
Thread Starter
Forum
Replies
Last Post