ABS problem HELP!! where can i get?
#1
Full Member
Thread Starter
Join Date: Mar 2008
Location: oklahoma
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
ABS problem HELP!! where can i get?
a while back i was in a wreck, not bad, and found out that the bulb that goes to the ABS malfunction light was gone....so in other words my ABS is out.
this is what iv gathered...ABS motor works, the rear module in trunk on driver side is flashing 10x's once i turn the key to ACC. what does this mean?
also where can i find PFS SMIC or FMIC intercooler set ups? i searched for a web page but cant find anyone who sells the kits.....please help to get another FD back on the road....ha ha
this is what iv gathered...ABS motor works, the rear module in trunk on driver side is flashing 10x's once i turn the key to ACC. what does this mean?
also where can i find PFS SMIC or FMIC intercooler set ups? i searched for a web page but cant find anyone who sells the kits.....please help to get another FD back on the road....ha ha
#4
Rotary Freak
iTrader: (24)
You might as well search for the FSM where it tells u details on the diagnostic sequence and procedure.
Here is the url
There should be service manual in PDF file. Download it, search up the ABS section. It should lead you to what you need and find your "flashing codes" Good luck and hope this can be of a little help.
-AzEKnightz
Here is the url
There should be service manual in PDF file. Download it, search up the ABS section. It should lead you to what you need and find your "flashing codes" Good luck and hope this can be of a little help.
-AzEKnightz
#7
Full Member
Thread Starter
Join Date: Mar 2008
Location: oklahoma
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
No my check engine light isn't on. Only the ABS light. And there's a light on the ABS controll module that is located In the left rear within the trunk panels. The module is what is flashin 10x.
Trending Topics
#11
Rotary Freak
Later version III~IV ABS ECU doesn't have the lamp in the unit, requiring bridging in the diagnostic box and reading the flashes elsewhere ....somewhat different on a LHD I understand. But this is an interpretation of what fault codes mean for this ABS.
you'd hope there is some commonality, although don't think there is any mention in the first edition workshop manual of a decode. If you're getting different duration flashes, long ones are 1.2 secs, shorts .4 secs.
you'd hope there is some commonality, although don't think there is any mention in the first edition workshop manual of a decode. If you're getting different duration flashes, long ones are 1.2 secs, shorts .4 secs.
#12
Full Member
Thread Starter
Join Date: Mar 2008
Location: oklahoma
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Later version III~IV ABS ECU doesn't have the lamp in the unit, requiring bridging in the diagnostic box and reading the flashes elsewhere ....somewhat different on a LHD I understand. But this is an interpretation of what fault codes mean for this ABS.
you'd hope there is some commonality, although don't think there is any mention in the first edition workshop manual of a decode. If you're getting different duration flashes, long ones are 1.2 secs, shorts .4 secs.
you'd hope there is some commonality, although don't think there is any mention in the first edition workshop manual of a decode. If you're getting different duration flashes, long ones are 1.2 secs, shorts .4 secs.
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
15
09-16-15 06:57 AM