a while back i was in a wreck, not bad, and found out that the bulb that goes to the ABS malfunction light was gone....so in other words my ABS is out.

this is what iv gathered...ABS motor works, the rear module in trunk on driver side is flashing 10x's once i turn the key to ACC. what does this mean?

also where can i find PFS SMIC or FMIC intercooler set ups? i searched for a web page but cant find anyone who sells the kits.....please help to get another FD back on the road....ha ha

 

Bump

 

BUMP

come on people i need help....

all i need are the code definitions.

 

You might as well search for the FSM where it tells u details on the diagnostic sequence and procedure.

Here is the url

There should be service manual in PDF file. Download it, search up the ABS section. It should lead you to what you need and find your "flashing codes" Good luck and hope this can be of a little help.

-AzEKnightz

 

Here..

http://www.fd3s.net/engine_codes.html

 

"the rear module in trunk on driver side is flashing 10x's once i turn the key to ACC"

What is your check engine light flashing? you haven't described that

 

No my check engine light isn't on. Only the ABS light. And there's a light on the ABS controll module that is located In the left rear within the trunk panels. The module is what is flashin 10x.

 

Ive got an M2 large smic with piping, couplers, and clamps. Pm me if your interested

 

I am selling my PFS SMIC.

 

do you have any pics, and is it direct bolt on or would i have to customize some things?

 

Later version III~IV ABS ECU doesn't have the lamp in the unit, requiring bridging in the diagnostic box and reading the flashes elsewhere ....somewhat different on a LHD I understand. But this is an interpretation of what fault codes mean for this ABS.





you'd hope there is some commonality, although don't think there is any mention in the first edition workshop manual of a decode. If you're getting different duration flashes, long ones are 1.2 secs, shorts .4 secs.

 

well mine is a 93 and has a light in the computer...i did jump the wires but i dont have any engine problems, and i pretty sure it only diagnoses the engine. but thanks for your help.