99spec brakes
#1
99spec brakes
Id like to know what a set of used front brake rotors from a RZ/RS or 99spec could be worth? Its the bigger brakes. Or where to buy new ones?
And the rear calipers are the same as the ones with smaller rotors?? Its just the bracket thats different??
Thnx
And the rear calipers are the same as the ones with smaller rotors?? Its just the bracket thats different??
Thnx
#2
AponOUT!?
iTrader: (31)
This has definitely been covered a number of times. Have you tried searching?
https://www.rx7club.com/3rd-generati...brakes-863794/
https://www.rx7club.com/3rd-generati...n-99-a-827709/
https://www.rx7club.com/3rd-generati...talled-928342/
https://www.rx7club.com/3rd-generati...brakes-863794/
https://www.rx7club.com/3rd-generati...n-99-a-827709/
https://www.rx7club.com/3rd-generati...talled-928342/
#3
Rear caliper, the only difference is the slider (extended) and the larger diameter rotor.... everything else is the same. Both 99 front and rear use stock sized FD pads.
If you've got any more questions please feel free to PM us... I know a little more than I'd like to about the stock and 99 brakes .
-Heath
__________________
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
SAKEBOMB GARAGE LLC
www.SAKEBOMBGARAGE.com
Specialty aftermarket parts & service // Fremont, California
Contact: info@sakebombgarage.com
#7
Full Member
I've been searching for some help with this question but haven't found anything yet.
I'm installing a big front brake kit on my 94 soon and would like to upgrade to the larger RZ/RS (314mm) rear brakes.
I've found the following rear caliper brackets on RHD but they basically have the same description yet different part numbers.
Anyone know what brackets are required to run the larger rear rotors?
*Clearance* Mazda OEM Rear Brake Support Mounting FD3S RX-7 16-inch
Mazda OEM Rear Brake Support Mounting FD3S Non-Spirit R
Mazda OEM Rear Brake Support Mounting FD3S RX-7 Spirit R
Thanks
Richard
I'm installing a big front brake kit on my 94 soon and would like to upgrade to the larger RZ/RS (314mm) rear brakes.
I've found the following rear caliper brackets on RHD but they basically have the same description yet different part numbers.
Anyone know what brackets are required to run the larger rear rotors?
*Clearance* Mazda OEM Rear Brake Support Mounting FD3S RX-7 16-inch
Mazda OEM Rear Brake Support Mounting FD3S Non-Spirit R
Mazda OEM Rear Brake Support Mounting FD3S RX-7 Spirit R
Thanks
Richard
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM