Hi all,

After a bit of info, I have a 16bit 1997 car and have bought a Rywire engine harness for it that obviously only come in 8bit. I have a patch loom for the ecu plugs so they aren't a problem.

My problem is the 2 plugs for the chassis harness, the 8bit rywire chassis harness plugs have a lot more wires than the oem 16bit chassis harness plugs. The corresponding socket on the chassis harness only has pins in it for the places that have the wires on the oem 16bit plug. My questions are 1. Are the wires pinned in the same locations on both the 8bit plug and 16bit plug?
2. Does it matter that the extra wires won't be connected, I.e. Are they inputs that the 16bit chassis doesn't need?

Basically, can I use the Rywire harness on my car?

Cheers,

 

Evil Aviator posted this before I wiped the thread.(I give credit where it is due and he's a good guy to help out when he can!)

From the RyWire website: "Our harness does not support the Austrailian 16-bit ECU's from 96-98"
https://www.rywire.com/rx7-harnesses-s/1832.htm

 

Yeah I know they say they don't support it but is that just because if the difference in ecu plugs, because I have that sorted with a patch loom. It's the chassis harness plugs that I'm struggling with. Has anybody used an 8bit loom successfully in a 16bit car?