54mm socket
#1
"That Rotary Guy"
Thread Starter
Join Date: Mar 2009
Location: clinton
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
54mm socket
I am just wondering where all the guys who have rebuilt their motors have found this socket. I cannot find it anywhere. Can you guys help me out a little here?
Trending Topics
#8
"That Rotary Guy"
Thread Starter
Join Date: Mar 2009
Location: clinton
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
I searched at my local Sears and they did not even carry a 19mm socket. Pretty worthless store if you ask me. They said they could not order a 54 or a 2 1/8. Anyway, I will check out some of the places you guys mentioned and thank you. Happy Easter guys.
Shannon
Shannon
#9
Full Member
iTrader: (4)
Join Date: Dec 2007
Location: Houston
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
On a related note, have a big extension ready too. I strap the engine down and then use one of the legs off my engine hoist (square boxed tube) slipped over the Harbo Frieght 3/4 breaker.
The leg is 4ft. 7in. long, slipped over the breaker bar gives about 5ft. total leverage, I weigh about 190lbs., and have to bounce on it a little so that's more than 950 ft-lbs. torque required to break it loose.
The leg is 4ft. 7in. long, slipped over the breaker bar gives about 5ft. total leverage, I weigh about 190lbs., and have to bounce on it a little so that's more than 950 ft-lbs. torque required to break it loose.
Thread
Thread Starter
Forum
Replies
Last Post
Blk 93
3rd Generation Specific (1993-2002)
7
09-28-15 01:45 PM
Amur_
2nd Generation Specific (1986-1992)
3
12-18-01 05:53 PM