Can someone give me the specs on the 3rd gen oil cooler. I'm using it for another application but when I got it there were no fittings on it. Is it a standard -AN or what. Also is the 3rd gen oil cooler better than the TII version?

Anyplace to get hoses for these? Can you cut the ends off the stock hoses and use clamps?

 

the ones on the oilcooler is a 22mm line i believe

 

some years are 20mm

22mmx1.5mm is the thread pitch of mine (93 touring)

the motor has 18mmx1.5mm on it