300 rwhp on sequential?
#26
WTB** Very Low Miles 94-95
Join Date: Jul 2001
Location: Tejas
Posts: 3,298
Likes: 0
Received 0 Likes
on
0 Posts
www.conceptart.org/dyno
that has my old m2 twin dyno sheets
381rwhp and 320lbs of tq sequentially.
my single is done. car back together next week yo!
woot!
j
that has my old m2 twin dyno sheets
381rwhp and 320lbs of tq sequentially.
my single is done. car back together next week yo!
woot!
j
#27
Rotary Freak
Join Date: May 2002
Location: Houston
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: 300 rwhp on sequential?
Originally posted by prew
i wouldnt call it easy. i have 294.7rwhp conservatively @ 12psi.
my mods are dp, cb, intake, fmic, microtech, ported motor, and fresh turbos.
steve prew
i wouldnt call it easy. i have 294.7rwhp conservatively @ 12psi.
my mods are dp, cb, intake, fmic, microtech, ported motor, and fresh turbos.
steve prew
#28
Senior Member
Join Date: Apr 2002
Location: Tokyo/Texas
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Re: twins
Originally posted by galognu
333 rwhp at .94 bar.
intake, DP, MP, CB, 850 primaries, RP fuel pump, power FC, jacobs rotary propack, Greddy SMIC,
I've been told you can see close to 400 rwhp with the Efini twins. I also thought about single turbo, but $$ and the lag have kept me from it.
G
333 rwhp at .94 bar.
intake, DP, MP, CB, 850 primaries, RP fuel pump, power FC, jacobs rotary propack, Greddy SMIC,
I've been told you can see close to 400 rwhp with the Efini twins. I also thought about single turbo, but $$ and the lag have kept me from it.
G
Wow....you're setup is pretty much identical to mine except for that I have a high flow cat and you have a midpipe. Chris Ott at Rotary Performance told me I could easily make another 20hp just from switching from high flow cat to midpipe like you. Hmmm....now the question is whether or not that 20hp is worth my car being extra stinky and an occasional scrubbing the soot off my rear bumper...
#30
Rotary Freak
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
I think I'll eventually go with Efini or some M2 twins (if I manage to find a good used set) in the future.
I want over 350rwhp. Currently my car is a dog with about 255rwhp at 12psi. I need to get my WG ported so I can remove the restrictor and I need a catback.
I want over 350rwhp. Currently my car is a dog with about 255rwhp at 12psi. I need to get my WG ported so I can remove the restrictor and I need a catback.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
Snook
Single Turbo RX-7's
18
10-08-15 10:09 PM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM