3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

2 oil questions......

Thread Tools
 
Search this Thread
 
Old Nov 6, 2007 | 10:25 AM
  #1  
Ernesto13B's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (4)
 
Joined: Jun 2007
Posts: 1,114
Likes: 0
From: California
2 oil questions......

I have already posted threads about my check engine light coming on, and throwing an oil position sensor code. My question is.... where is the oil pump position sensor located? I would hate to replace the oil pump if its only the sensor thats bad, which is why I wanna test it first to verify, thanks
Reply
Old Nov 6, 2007 | 10:37 AM
  #2  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
As I mentioned in the other thread, there is the oil pump itself which has no sensors or anything. Its mechanic and driven off the e-shaft. The ECU would be the last thing on th planet to know if there was a problem with that.

Then there is the metering oil pump which has the sensors and lines which run the injection nozzles on the rotor housing (under the solenoid rack) It is attached to the front cover on the passenger side (LHD car) just above the oil pan. If you are getting a OMP code, this is where its coming from.
Reply
Old Nov 7, 2007 | 06:35 AM
  #3  
badddrx7's Avatar
All Spooled Up
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2001
Posts: 2,752
Likes: 3
From: Ironton,ohio
The manual will plot you out a course of action associated with that code. Section F

later
Reply
Old Nov 7, 2007 | 07:27 AM
  #4  
Sgtblue's Avatar
Urban Combat Vet
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Oct 2003
Posts: 12,160
Likes: 983
From: Mid-west
Originally Posted by Ernesto13B
I have already posted threads about my check engine light coming on, and throwing an oil position sensor code. My question is.... where is the oil pump position sensor located? I would hate to replace the oil pump if its only the sensor thats bad, which is why I wanna test it first to verify, thanks

Originally Posted by Sgtblue
Although there are separate codes for each, from what I could tell the sensor, pump and stepping motor on the MOP/OMP assembly are not designed to be separated. If one goes bad, you replace all three. The wiring to the MOP/OMP connects just under the intake elbow and is pretty easy to get to. There you can check for proper voltage, resistance etc.
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/changing-oil-metering-pump-omp-while-car-my-how-675341/
^
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
13
Jan 9, 2018 11:19 AM
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 08:54 PM.