1600cc extreme fuel upgrade
04-02-03, 04:47 PM
#26
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: WILBURTON, OKLAHOMA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Well I only got part of my extreme fuel system today. I hope Jason is sending the rest with my Intercooler. I am missing my injectors,resistors, and my GM or Ford(what ever they are?) connectors for the injectors.
04-02-03, 04:51 PM
#27
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: WILBURTON, OKLAHOMA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Jason
With that kit I sell there are a couple small things that will have to be purchased. One are the injector clips, which I do have here. You will also need a couple 90degree bends for the regulator along with some fuel line. In the next couple of days Im going to figureout pricing and probably offer all of that in the kit, so there are no problems. That will raise the price a little, but less headache for you.
Thanks
Jason
www.rx7store.net
With that kit I sell there are a couple small things that will have to be purchased. One are the injector clips, which I do have here. You will also need a couple 90degree bends for the regulator along with some fuel line. In the next couple of days Im going to figureout pricing and probably offer all of that in the kit, so there are no problems. That will raise the price a little, but less headache for you.
Thanks
Jason
www.rx7store.net
And I think this stuff is all I need.
04-02-03, 04:54 PM
#28
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: WILBURTON, OKLAHOMA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by spoolin93r1
you will need 2 Earl's or similar brand -6an 90 degree fittings with 5/16 inch barbed ends for the fuel line. you will also need the same type of fitting for the return line from the FPR, but the bend will depend on where you mount it. the 2 90's, one will go on the end of the fuel rail, the other goes on the feed to the FPR. this is what i did at least, made it simple to install, you will also need a few feet of 5/16 fuel line and don't forget the hose clamps!
you will need 2 Earl's or similar brand -6an 90 degree fittings with 5/16 inch barbed ends for the fuel line. you will also need the same type of fitting for the return line from the FPR, but the bend will depend on where you mount it. the 2 90's, one will go on the end of the fuel rail, the other goes on the feed to the FPR. this is what i did at least, made it simple to install, you will also need a few feet of 5/16 fuel line and don't forget the hose clamps!
04-02-03, 06:21 PM
#29
Rotary Freak
Join Date: Oct 2002
Location: Salem, IN
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BRADYMAHONEY
spoolin93r1, thanks for the reply this is the best on in this thread. Do you have any pics of your install? Where did you mount you FPR?
spoolin93r1, thanks for the reply this is the best on in this thread. Do you have any pics of your install? Where did you mount you FPR?
i haven't developed pics of everything since i got it back together, but i made a bracket that puts it right behind the drivers fender well, in that little space. fits pretty good there and it's easy access. what ic did you order? if it's the apex, i can give ya some insight on that ordeal too!
04-02-03, 09:26 PM
#31
Rotary Freak
Join Date: Oct 2002
Location: Salem, IN
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BRADYMAHONEY
I ordered the Greddy 24v for the Greddy elbow. I hope it will work with my t78 kit.
I ordered the Greddy 24v for the Greddy elbow. I hope it will work with my t78 kit.
i envy you! i'm pretty much getting my car setup for a single and just gonna wait on a good deal for a kit or some money to just fall out of the sky! lol good luck with it all tho man
04-18-03, 10:50 AM
#33
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: WILBURTON, OKLAHOMA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by spoolin93r1
i haven't developed pics of everything since i got it back together, but i made a bracket that puts it right behind the drivers fender well, in that little space. fits pretty good there and it's easy access. what ic did you order? if it's the apex, i can give ya some insight on that ordeal too!
i haven't developed pics of everything since i got it back together, but i made a bracket that puts it right behind the drivers fender well, in that little space. fits pretty good there and it's easy access. what ic did you order? if it's the apex, i can give ya some insight on that ordeal too!
I need to order this stuff and don't want to order the wrong angles. I know I need the two 90's and the fuel line. Thanks,
04-23-03, 06:42 AM
#36
Lives on the Forum
man, you dont give up.... i offered to help but you never returned my PM or email.
maybe this thread will help you out.
https://www.rx7club.com/forum/showth...hreadid=174768
maybe this thread will help you out.
https://www.rx7club.com/forum/showth...hreadid=174768
04-23-03, 12:21 PM
#37
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: WILBURTON, OKLAHOMA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rxrotary2_7
man, you dont give up.... i offered to help but you never returned my PM or email.
maybe this thread will help you out. https://www.rx7club.com/forum/showth...hreadid=174768
man, you dont give up.... i offered to help but you never returned my PM or email.
maybe this thread will help you out.
https://www.rx7club.com/forum/showth...hreadid=174768
I appreciate you help.Brady
04-29-03, 09:32 PM
#38
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: WILBURTON, OKLAHOMA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
What size is the female end on the fuel rail. I know the male end is -6an , but I don't know what size the threaded hole is on the other side. Am I supposed to use the bolt looking thing on the stock rail? I want to get the adapter so I can use the Earls swivel fitting and the braided line in that spot instead.
04-29-03, 09:36 PM
#39
Rotary Enthusiast
Thread Starter
Join Date: Dec 2001
Location: WILBURTON, OKLAHOMA
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone have pics of their install yet? I have seen some pics but the more the better. So I can get some ideas. I want to have this all figured out before I tear my car apart. On the FPR do we just use one side of the inlet and use the plug for the other? This is the hardest thing to find really staight forward information on, and yes I did ride the little bus to school.
04-30-03, 07:45 AM
#41
Lives on the Forum
the rails are more than likely tapped for 3/8 NPT (National Pipe Thread)
here, maybe this will help you somewhat.
http://www.3rdgenrx7.com/keithsrails.htm
i am going to PM you my phone number. i am sick of seeing this thread. i will help you over the phone more.
here, maybe this will help you somewhat.
http://www.3rdgenrx7.com/keithsrails.htm
i am going to PM you my phone number. i am sick of seeing this thread. i will help you over the phone more.
Thread
Thread Starter
Forum
Replies
Last Post
