12V Ingnition on/off wire?
I used the ignition wire off my turbo timer as a 12v switch. There isn't anything really usable within the engine bay. Alternatively, you can wire into the cigarette lighter as that acts as a switch for most accessories in the car.
I went and bought Add-A-Circuit at Autozone. It was a little fuse holder that fit two fuses and had a wire coming off of it.
I put it in place of the rear-wiper fuse and it works great.
I put it in place of the rear-wiper fuse and it works great.
Im installing water injection and need a wire that only comes on when the ignition is turned on. So where is the ignition wire? Anything I can get to without tearing up the dash?
Originally posted by r0gu3
I just tapped into the ignition fuse.
I just tapped into the ignition fuse.
Lower driver's side kick panel. Take the black fuse box off. Just above the fuse box are two female spade connectors, look like a plugin in your house. The one on the right is 12V ignition switched. I would double check it with a volt meter, but that should be right.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
alexdimen
3rd Generation Specific (1993-2002)
20
Oct 23, 2015 01:50 PM
DocHoliday89
3rd Generation Specific (1993-2002)
5
Oct 12, 2015 07:42 PM




