RZ 330mm Front Brake Rotor Alternatives
#1
RZ 330mm Front Brake Rotor Alternatives
I've seen the RZ Front Calipers popping up and not sure which other 330mm rotors I could use in place of the Mazda OEM ones. I've searched and haven't found a solid answer. Not needing a crazy expensive 2pc rotor, seen some Mitsubishi or Nissan OEM combos. I'm looking for slotted/drilled as well. Can someone help me out?
Last edited by WhoDiddy6; 11-09-20 at 09:46 AM.
#3
Non Runner
iTrader: (3)
RZ brakes are 314mm in diameter and 32mm thick.
There are loads of aftermarket options out there. Dixcel is quite popular. Project Mu and a lot of the two piece designs tend to be prone to cracking from my experience, personally I've stuck with oem Mazda discs on the front.
The RZ discs are a lot more expensive than the smaller oem discs unfortunately.
There are loads of aftermarket options out there. Dixcel is quite popular. Project Mu and a lot of the two piece designs tend to be prone to cracking from my experience, personally I've stuck with oem Mazda discs on the front.
The RZ discs are a lot more expensive than the smaller oem discs unfortunately.
Thread
Thread Starter
Forum
Replies
Last Post
Jeezus
1st Generation Specific (1979-1985)
15
12-05-06 01:30 AM
Irrigated_Onion
Suspension/Wheels/Tires/Brakes
9
08-25-06 01:53 AM