2maxx77

Hi I have 2 flat sided washers, I believe they are definitely from my front and rear caliper rebuild , but now can’t figure out where they go?, hopefully someone has come across these in rebuilding there calipers as well. Any help would be greatly appreciated ...Thanks

cr-rex

iTrader: (114)

For what car....

with your post in the most wrong section 😒😒

2maxx77

For a 1993 Rx7 fd...Lance

cr-rex

iTrader: (114)

Its the washer for the upper mount bolt on the caliper. One per side

2maxx77

I take it that you mean my front calipers?..Thanks

cr-rex

iTrader: (114)

Yes

2maxx77

Hi cr-rex, thanks for the help on the flat washer, wondering if you can help me with the 2 bolts that connect the caliper to the bracket, I know the top bolt has a lock washer and the flat sided washer, but is there no washer on the bottom bolt, just a lock washer?, seems to me there would be regular washer on the bottom too..

tomsn16

iTrader: (283)

Brake line hose bracket replaces flat washer on bottom.

2maxx77

Well that messed me up, you saying the brake line feeds in at the bottom of the caliper on the right side

tomsn16

iTrader: (283)

Sorry, brake line is at top on both sides and bracket same. Your FSM should clearly show the proper assembly

2maxx77

Thanks, not sure what FSM means, and I have a manual, but it’s got to be the smallest manual I’ve seen, it’s fat but small in page size..Thanks

tomsn16

iTrader: (283)

Oh dear....FSM= Factory Service Manual
section P page 22 (in the '94 manual, should be same in the '93.