Help with flat sided washer
 

Hi I have 2 flat sided washers, I believe they are definitely from my front and rear caliper rebuild , but now can’t figure out where they go?, hopefully someone has come across these in rebuilding there calipers as well. Any help would be greatly appreciated ...Thanks
https://cimg3.ibsrv.net/gimg/www.rx7...e00a7c847.jpeg
https://cimg4.ibsrv.net/gimg/www.rx7...9aa69def0.jpeg

For what car....

with your post in the most wrong section 😒😒

For a 1993 Rx7 fd...Lance

Its the washer for the upper mount bolt on the caliper. One per side

Washer
 

I take it that you mean my front calipers?..Thanks

Yes

Hi cr-rex, thanks for the help on the flat washer, wondering if you can help me with the 2 bolts that connect the caliper to the bracket, I know the top bolt has a lock washer and the flat sided washer, but is there no washer on the bottom bolt, just a lock washer?, seems to me there would be regular washer on the bottom too..

Brake line hose bracket replaces flat washer on bottom.

Well that messed me up, you saying the brake line feeds in at the bottom of the caliper on the right side

Sorry, brake line is at top on both sides and bracket same. Your FSM should clearly show the proper assembly

Thanks, not sure what FSM means, and I have a manual, but it’s got to be the smallest manual I’ve seen, it’s fat but small in page size..Thanks

Oh dear....FSM= Factory Service Manual
section P page 22 (in the '94 manual, should be same in the '93.