EVO-R FD DEMON-i sleek headlight kit new release
#104
Pistons are for pussy's
Thanks David. If anyone interest just buying the kit without lights, can be order here:
Mazda Rx-7 FD3S DEMON-i Sleek Headlight Kit
Mazda Rx-7 FD3S DEMON-i Sleek Headlight Kit
#118
Couldn't you just use them both together on high beam? And the rectangular ones for low? Is there any more non hid kits for sale and on the projector lights it said 35 watts and the stock out put Is 55watts I think, is that safe to just wire it up to stock output?
#120
Mainly I was asking if I can run the lights off of the stock wires? Because the projector lights take 35w and the stock take 60w ? I was using the cwest kit before and just ran them both lights off stock wires because they were both rated at 55w-60w and shared the ground! And did the wire upgrade under the dash were my high beams would just turn both lights on! But since the high beams in your kit are 35w do I have to run a relay to reduce the stock output? Sorry if I'm confusing you just trying to figure out how they are wired to the stock headlight output wires? I already ordered the kit and don't wanna go hid and from your pics the lighting looks great! Do the piaa lights that come with the r magic kit fit in round highbeam spot perfect? I know those take 55w and could use each light as sinle filament I guess? But the ones u supply seem to work great! Can't wait to put them on!
#121
Full Member
Well my kit is fitted yesterdat.. Left one dropped perfectly in place no big issues but the one on the Right is a nightmare!! My car is at the body shop now to get everything sorted out (fill gap, adjust hight) costing me more cash offcourse...
looks great but have mixed feelings about this..
looks great but have mixed feelings about this..
#122
Well my kit is fitted yesterdat.. Left one dropped perfectly in place no big issues but the one on the Right is a nightmare!! My car is at the body shop now to get everything sorted out (fill gap, adjust hight) costing me more cash offcourse...
looks great but have mixed feelings about this..
looks great but have mixed feelings about this..
#124
Junior Member
iTrader: (4)
Join Date: Dec 2009
Location: SoCal
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Mainly I was asking if I can run the lights off of the stock wires? Because the projector lights take 35w and the stock take 60w ? I was using the cwest kit before and just ran them both lights off stock wires because they were both rated at 55w-60w and shared the ground! And did the wire upgrade under the dash were my high beams would just turn both lights on! But since the high beams in your kit are 35w do I have to run a relay to reduce the stock output? Sorry if I'm confusing you just trying to figure out how they are wired to the stock headlight output wires? I already ordered the kit and don't wanna go hid and from your pics the lighting looks great! Do the piaa lights that come with the r magic kit fit in round highbeam spot perfect? I know those take 55w and could use each light as sinle filament I guess? But the ones u supply seem to work great! Can't wait to put them on!
Look at the amp rating on the EVO projectors versus the stockers. Then just change the fuse to the appropriate rating if needed.