Front emissions harness connectors where harness bends 90* to driver's side of engine

Hi, I'm at a disadvantage trying to re install a rebuild.
I took tons of pics, but my laptop died and just using my phone + service manuals ATM.
I thought reconnecting emissions harness would be easy, but some connectors weren't labelled.
Turbo + Waste gate solenoids and the solenoid behind these 2 are the 3 connectors with white fronts. All 3 coolant connectors are already connected as are all injectors, I think the all green connector is fuel temp on the center of the OEM secondary fuel rail ? (it's the only connector that mates to that plug)
The problem is my airpump connector was completely destroyed somehow while stored or removed. The 2 terminals are still reuseable.
Anybody know which connector it might be ? or have a male portion on their scrapped air pump they would care to sell ?
The harness is from Atkin's, so I'd prefer not to alter it using aftermarket connectors.
I can't leave it unconnected because of an upcoming state patrol title inspection. Thanks if you can help

 

This one is the air pump connector .

 

Great , Thanks !
I think I can order that connector online, if I can still find the vendor.

 

Sure, you can get them from this link