Zanity rx7, finally.
04-22-09, 12:40 PM
#26
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
lol is this your fc or your friends 
Anyways push up on the sunroof, it'll go up then.
Then remove it and clean the tracks and inspect it for anything blocking, mine will occasionally not close
but mine wont open unless I push up
Oh wait even to go back I gotta push up, yeah take it apart somethings blocking it from going back
Anyways push up on the sunroof, it'll go up then.
Then remove it and clean the tracks and inspect it for anything blocking, mine will occasionally not close
but mine wont open unless I push upOh wait even to go back I gotta push up, yeah take it apart somethings blocking it from going back
i'm pretty sure they need a good oiling because they have been sitting for a few years.
myne goes up and down just has trouble moving back.
i still might take it apart and inspect it.
04-22-09, 04:27 PM
#27
Smoke moar
no man take it apart, as a kid I did lube/clean it but it just makes it worse till it jams, when it jams you'll be f'ing with it and it'll not want to go back at all, then you have to keep your cars top open or fix it 
It was a pretty simple fix, little rocks and dust build up blocking it
It was a pretty simple fix, little rocks and dust build up blocking it
04-22-09, 04:40 PM
#29
Smoke moar
ha yes thats a good idea, if you remember just clean it like a ****, sounds like you'd do that, my dad half assed it awhile back, its already stuck twice, luckly I was able to unstick it -_- (It would randomly rain around that time :X)
04-30-09, 08:05 PM
#32
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
gah, finally did everything needed to start it but no.
did not start.
wasn't expecting it to but was hoping it would.
gonna test for spark and compression tomorrow.
did not start.
wasn't expecting it to but was hoping it would.
gonna test for spark and compression tomorrow.
05-07-09, 10:33 PM
#33
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
cleaned the grounds and battery terminal.
need new battery cables soon.
thats what was causing the no crank.
installed fuel filter.
fuel pump doesn't work.
but have spark and air and all that.
need new battery cables soon.
thats what was causing the no crank.
installed fuel filter.
fuel pump doesn't work.
but have spark and air and all that.
05-19-09, 05:33 PM
#41
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
pics soon.
maybe video.
i started it again today.
it stopped gushing fuel.
but it smokes, a lot.
and the idle fluctuates between 1000 and 2000 rpm.
the fuel is really old(2 years) and i'm guessing that or maybe some kind of seal?
maybe video.
i started it again today.
it stopped gushing fuel.
but it smokes, a lot.
and the idle fluctuates between 1000 and 2000 rpm.
the fuel is really old(2 years) and i'm guessing that or maybe some kind of seal?
05-19-09, 05:56 PM
#42
Full Member
Join Date: Aug 2008
Location: ORLANDO
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
what color smoke cause mine only smokes when i rev it at a stop.so i dont rev past 6k when not moving any more. mine makes huge white plums of smoke.lol
but it dont smoke when at WOT though. it pisses me off.
TII
but it dont smoke when at WOT though.
it pisses me off.TII
05-20-09, 05:05 PM
#43
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
ok. stopped smoking.
so first the gushing fuel stopped yesterday.
today smoke stopped.
tomorrow idle problem stop?
haha, guess thats a bit much to hope for.
have video.
gonna post soon.
so first the gushing fuel stopped yesterday.
today smoke stopped.
tomorrow idle problem stop?
haha, guess thats a bit much to hope for.
have video.
gonna post soon.
05-20-09, 05:07 PM
#44
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
http://s12.photobucket.com/albums/a2...t=100_0068.flv
i rev it first then dies.
i start again and the rest it does by itself.
any clues?
i rev it first then dies.
i start again and the rest it does by itself.
any clues?
05-28-09, 04:48 PM
#46
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
ok, finally got around to taking a couple pics.
almost done painting the interior.
then when i get paid soon gonna replace the belts and buy some carpet to put down.
also need to find a thermowax, thats why its been idling so bad.
but heres the interior progress and all the stuff i took off for now.
almost done painting the interior.
then when i get paid soon gonna replace the belts and buy some carpet to put down.
also need to find a thermowax, thats why its been idling so bad.
but heres the interior progress and all the stuff i took off for now.
05-28-09, 07:10 PM
#47
http://s12.photobucket.com/albums/a2...t=100_0068.flv
i rev it first then dies.
i start again and the rest it does by itself.
any clues?
i rev it first then dies.
i start again and the rest it does by itself.
any clues?
05-28-09, 07:34 PM
#50
Zoom Zoom Baby
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Denver/Vegas
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
go here
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/where-do-these-hoses-go-842081/