2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

yellow goo in oil fill neck

Thread Tools
 
Search this Thread
 
Old 12-08-04, 06:43 PM
  #1  
Rotary Enthusiast

Thread Starter
iTrader: (25)
 
Peruvianrx7's Avatar
 
Join Date: Sep 2003
Location: Melbourne, FL
Posts: 1,440
Likes: 0
Received 0 Likes on 0 Posts
yellow goo in oil fill neck

i have no clue why?... rebuild engine 5k ago, the upper coolant hose that connects to the BAC has a tiny hole... maybe condensation is getting in from there? my coolant reservoir is fine... Maybe my oil cap is not sealing properly? any ideas?on top of the cap there is water drops and inside the filler neck there is yellow/white film that feels like mucus...
Old 12-08-04, 07:22 PM
  #2  
Rotary Enthusiast

Thread Starter
iTrader: (25)
 
Peruvianrx7's Avatar
 
Join Date: Sep 2003
Location: Melbourne, FL
Posts: 1,440
Likes: 0
Received 0 Likes on 0 Posts
after some research i found that it has something to do with a non working PCV? is that a purge controller valve? where is that located?
Old 12-08-04, 07:22 PM
  #3  
SOLD THE RX-7!

 
Scott 89t2's Avatar
 
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes on 0 Posts
is everything stock? vac rack etc. check the 2 vent lines from the oil filler neck and make sure they are going somewhere and not pluged off. lack of "crankcase" venting will cause the water build up. I get a bit in mine.
Old 12-08-04, 07:48 PM
  #4  
4-seater TII

 
vice's Avatar
 
Join Date: Aug 2004
Location: lynnwood, WA
Posts: 438
Likes: 0
Received 0 Likes on 0 Posts
i get that goo too i have no idea what it is
Old 12-08-04, 08:24 PM
  #5  
STUCK. I got SNOWNED!!!!!

iTrader: (7)
 
Terrh's Avatar
 
Join Date: Mar 2002
Location: Windsor, On
Posts: 8,723
Received 13 Likes on 9 Posts
I get that goo too sometimes, and I got that goo ALOT in my 12A FB
Old 12-08-04, 10:56 PM
  #6  
Rotary Enthusiast

Thread Starter
iTrader: (25)
 
Peruvianrx7's Avatar
 
Join Date: Sep 2003
Location: Melbourne, FL
Posts: 1,440
Likes: 0
Received 0 Likes on 0 Posts
umm thanx guys but no help yet... lol no the car is not stock ( I removed the rats nest) ( no airpump and my ACV is broken and not connected) and that lil vent out of the filler neck is not going anywhere... anyone knows anything about it?
Old 12-08-04, 10:58 PM
  #7  
pistons=teh suck

 
sectachrome's Avatar
 
Join Date: May 2003
Location: NJ
Posts: 933
Likes: 0
Received 0 Likes on 0 Posts
solution:


STOP HUMPING YOUR FILLER NECKS!
Old 12-08-04, 11:01 PM
  #8  
my fc broke

 
1SxyRXy's Avatar
 
Join Date: Feb 2003
Location: rohnert park,CA/ bay area
Posts: 2,231
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by sectachrome
solution:


STOP HUMPING YOUR FILLER NECKS!


yea you people are sick.
Old 12-09-04, 07:38 AM
  #9  
Like Ghandi with a gun

 
Kenteth's Avatar
 
Join Date: Mar 2003
Location: Rapid City, SD
Posts: 4,584
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 1SxyRXy
yea you people are sick.
you mean

yea people make me sick
Old 12-09-04, 07:43 AM
  #10  
Dont drink and drift

iTrader: (1)
 
mazda se's Avatar
 
Join Date: May 2004
Location: Drums pa
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
what it is, is condinsation forming in the oil pan from not letting the motor heating up to operating temps.And if you are in a lot of stop and go traffic, or short trips( less than a mile) the shifting tempature in the motor will create water.That is also why you see water coming out of tail pipes.
Old 12-09-04, 07:54 AM
  #11  
Like Ghandi with a gun

 
Kenteth's Avatar
 
Join Date: Mar 2003
Location: Rapid City, SD
Posts: 4,584
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by mazda se
what it is, is condinsation forming in the oil pan from not letting the motor heating up to operating temps.And if you are in a lot of stop and go traffic, or short trips( less than a mile) the shifting tempature in the motor will create water.That is also why you see water coming out of tail pipes.
and i always thought that was just bad gas... :/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FD7KiD
3rd Generation Specific (1993-2002)
15
02-26-21 10:12 PM
FD7KiD
Single Turbo RX-7's
1
08-17-15 11:50 PM



Quick Reply: yellow goo in oil fill neck



All times are GMT -5. The time now is 01:14 PM.