Wiring problem.Please help!
#1
Blue 7
Thread Starter
Join Date: Mar 2006
Location: Battle Ground, WA.
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Wiring problem.Please help!
I need to hook the rear chassis wiring harness on my 90 rx7 but my connectors don't match up since i swapped my engine with the turbo engine. i switched all the hiring in the front half but dont have the new wiring for the rear. i do have the connectors that had been cut when they cut the car in half. If any body could help me out on wiring my existing harness with the connecters that fit so that i could atleast get the brake lights blinkers and fuel pump to work. The new set up has to green connectors on the driver side, and 1 white one on the passenger side. the old set up had a 1green and 1 white one that is square rather than elongated on the driver side.
#3
Blue 7
Thread Starter
Join Date: Mar 2006
Location: Battle Ground, WA.
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
I have a little understanding of wiring diagrams. But my haynes repair manual just doesnt cover it enough. i was hoping to find something that couldtell color of each wire and location in vehicle
#7
Now With 10th AE Fun!
iTrader: (1)
Join Date: Jun 2005
Location: CA
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
here is the FSM http://www.teamfc3s.org/main/factory...ual/1989_1991/
Trending Topics
#8
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Originally Posted by RED1990GTU
here is the FSM http://www.teamfc3s.org/main/factory...ual/1989_1991/
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM