Will s5 interior work on s4?
Will s5 interior work on s4?
just wondering, im buying s5 door panels, glove box, center console, and the radio/a/c control until surround trim. Will these parts work on an 1988 rx7?
Joined: Dec 2003
Posts: 6,598
Likes: 10
From: Temple, Texas (Central)
Some parts will work, others won't. The main one that comes to mind is the a-pillar since s's didn't have auto seat belts. The center console is different as well, but it might still work just look weird.
This isn't the best picture, but it is doable.
you have to drill holes for the seat belts and paint your s4 b-pillars to black. The headliner will have gaps on each side and you'll have holes in the back where the light and cargo cover rails go.
you have to drill holes for the seat belts and paint your s4 b-pillars to black. The headliner will have gaps on each side and you'll have holes in the back where the light and cargo cover rails go.
Trending Topics
Door panels MAY fit but there will be no room for speakers. That part of the door was changed in in the series conversion. Might work if you cut them out, but it would still be a fab job.
i dont plan on doing a complete interior swap. its just I got my interior with a white glvoe box, white seats, door panels painted white in the middle, and the center console armwrest is white. I want it to be all black so Im just replacing the white stuff. And my sterior/logicon surround trim is all busted. s5 parts seems to be in better condition and a lot nicer. So we have,,,,
YES on the glove box,
MAYBE on the center console.
YES on the door panels but no place for door speakers, and
MAYBE on the stereo/logicon surround trim?
YES on the glove box,
MAYBE on the center console.
YES on the door panels but no place for door speakers, and
MAYBE on the stereo/logicon surround trim?
center console fits. i have a s5 one in my car but it has less room than the s4 ones becasue of the seatbelt retractor that is usually under it. and the stereo/ logicon surround fits for sure as well. I have it on mine... but it won't match up perfectly with the plastic shifter surround peice
Those of you who say the S5 rubber radio/logicon surround works, please show us a picture of the area at the top of the surround and near the shifter at the bottom. I would say you can make it look alright, but interchangeable (i.e. factory designed to fit) they aren't.
Thread
Thread Starter
Forum
Replies
Last Post
Heedlessone
Group Buy & Product Dev. FD RX-7
288
Sep 16, 2018 07:22 PM
thecody59
1st Generation Specific (1979-1985)
40
Aug 23, 2015 06:41 PM





