Why can 89 Na's run 8k, but 89 T2 says 7k?
Why can 89 Na's run 8k, but 89 T2 says 7k?
Hey, whats up all, Just had a curious question. I saw an 89 NA and it redlines at about 8k, My 89 T2 redlines at 7k, whats up with that? are they diffenent blocks, what keeps my 89 from having that high redline, is it the turbo?
Thanks,
Jesse A.
89 T2, Full straight exhaust, bonez intake, msd 6A, jacobs wires, Walbro 255 fp,Hks Fcon, Hks turbo timer, Greddy Profec B, Hawk Hp+ pads, Autometer Ultralite boost and air/ fuel gauges on the A-pillar. best 18th slipping clutch 8.90, best quarter same slipping clutch 14.0 @101.2 mph
Thanks,
Jesse A.
89 T2, Full straight exhaust, bonez intake, msd 6A, jacobs wires, Walbro 255 fp,Hks Fcon, Hks turbo timer, Greddy Profec B, Hawk Hp+ pads, Autometer Ultralite boost and air/ fuel gauges on the A-pillar. best 18th slipping clutch 8.90, best quarter same slipping clutch 14.0 @101.2 mph
becuase the stock turbo is a big restriction in the exhaust. My power and boost starts droping off around 6500.
with a bigger turbo and the right fueling the motor should be good for 8 grand, cause it's got lighter rotors and other improvments that the 89+ N/As have.
with a bigger turbo and the right fueling the motor should be good for 8 grand, cause it's got lighter rotors and other improvments that the 89+ N/As have.
Re: Why can 89 Na's run 8k, but 89 T2 says 7k?
Originally posted by yz007
Hey, whats up all, Just had a curious question. I saw an 89 NA and it redlines at about 8k, My 89 T2 redlines at 7k, whats up with that? are they diffenent blocks, what keeps my 89 from having that high redline, is it the turbo?
Thanks,
Jesse A.
89 T2, Full straight exhaust, bonez intake, msd 6A, jacobs wires, Walbro 255 fp,Hks Fcon, Hks turbo timer, Greddy Profec B, Hawk Hp+ pads, Autometer Ultralite boost and air/ fuel gauges on the A-pillar. best 18th slipping clutch 8.90, best quarter same slipping clutch 14.0 @101.2 mph
Hey, whats up all, Just had a curious question. I saw an 89 NA and it redlines at about 8k, My 89 T2 redlines at 7k, whats up with that? are they diffenent blocks, what keeps my 89 from having that high redline, is it the turbo?
Thanks,
Jesse A.
89 T2, Full straight exhaust, bonez intake, msd 6A, jacobs wires, Walbro 255 fp,Hks Fcon, Hks turbo timer, Greddy Profec B, Hawk Hp+ pads, Autometer Ultralite boost and air/ fuel gauges on the A-pillar. best 18th slipping clutch 8.90, best quarter same slipping clutch 14.0 @101.2 mph
were you selling it last month? or did you just buy it? maybe someone was using your picture...but that exact car was being sold on thepartstrader about 3-4 weeks ago. haha
Re: Why can 89 Na's run 8k, but 89 T2 says 7k?
Originally posted by yz007
Hey, whats up all, Just had a curious question. I saw an 89 NA and it redlines at about 8k, My 89 T2 redlines at 7k, whats up with that? are they diffenent blocks, what keeps my 89 from having that high redline, is it the turbo?
Hey, whats up all, Just had a curious question. I saw an 89 NA and it redlines at about 8k, My 89 T2 redlines at 7k, whats up with that? are they diffenent blocks, what keeps my 89 from having that high redline, is it the turbo?
Trending Topics
Re: Re: Why can 89 Na's run 8k, but 89 T2 says 7k?
Originally posted by Erik
nice car man
were you selling it last month? or did you just buy it? maybe someone was using your picture...but that exact car was being sold on thepartstrader about 3-4 weeks ago. haha
nice car man
were you selling it last month? or did you just buy it? maybe someone was using your picture...but that exact car was being sold on thepartstrader about 3-4 weeks ago. haha
When did you get the GT-X?
Re: Re: Re: Why can 89 Na's run 8k, but 89 T2 says 7k?
Originally posted by Pouya
Eric,
When did you get the GT-X?
Eric,
When did you get the GT-X?
i bought it in late september...finally found one
hehe. of course the TPS turned to **** on my while i was driving it back from where i got it (15 hours!!!) but after i put a new one it, its fast again, hehe. now it just needs a new BAC valve to fix the idle.
I had it on the parts trader for sale, I was just going to see what kinda reply's i had, I got a few, I was going to go buy a third gen, but changed my mind. This car is too nice to get rid of
,
Thanks for the info, so how i understand it, if i get a To4E or 60-1 running 8k will still be a bad idea? cause the ports are smaller?
Jesse
,Thanks for the info, so how i understand it, if i get a To4E or 60-1 running 8k will still be a bad idea? cause the ports are smaller?
Jesse
Well...
I think it's a combo of things. The faster the engine spins, the faster it draws in air=the more boost a turbo is putting on the engine. More boost=more pressure. That can be bad. Also, if you run a turbo up to red line, you have a good chance of leaning the car out, and as we discussed earlier, bad things happen when the car runs lean...
like I said you need the right fueling too. you'd probably need a slight street port too, otherwise power might still drop off. you'd want a full T04 to get rid of the stock exhuast side. which is NOT cheap, and is a big step which requires lots of things.
Thanks, Yea, ill be getting an AIC, i have the walbro fuel pump, and the Fcon to max out my stock injectors, I saw a additional injector plate that looked nice that fits right where the top intake manifold attaches to the bottom intake manifold, I have a few engines lying around, I should be able to use my 550cc' injectors, 2 of those should give me pleanty of fuel 
thanks again,
Jesse

thanks again,
Jesse
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
turbo-minivan
General Rotary Tech Support
69
Feb 4, 2016 12:29 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM




