Where to get Jspec........
#1
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Where to get Jspec........
This probably has been covered before but i have searched and tried a couple places with no luck. I havent really found these places that some speak of with 3-6 month warranty's and something on paper showing the compression info (which may be iffy but better then nothing)
So far ive tried
Nippon Motors- Called and they said they had 2 in and compression #'ers are usually around 70-80psi I dont know but that seems a little lower then what i'd like. I'll call tomorrow when they find out the comression.
Toysport- Only had a 20B
Japan Direct- only had a shortblock rebuilt for 1550. They dont think they'll be receiving very many S4/S5 engines anymore because its becoming more and more difficult to find usuable/sellable blocks.
FC3S.org-Spoke and met up with Dave, really helpful guys with some excellent products. Only thing keeping me from buying is they're a bit iffy on what accessories are included which is beyond their control.
So do you guys have any suggestions on where else I can try? Thanks in advance.
Sidenote- My 1200th post
So far ive tried
Nippon Motors- Called and they said they had 2 in and compression #'ers are usually around 70-80psi I dont know but that seems a little lower then what i'd like. I'll call tomorrow when they find out the comression.
Toysport- Only had a 20B
Japan Direct- only had a shortblock rebuilt for 1550. They dont think they'll be receiving very many S4/S5 engines anymore because its becoming more and more difficult to find usuable/sellable blocks.
FC3S.org-Spoke and met up with Dave, really helpful guys with some excellent products. Only thing keeping me from buying is they're a bit iffy on what accessories are included which is beyond their control.
So do you guys have any suggestions on where else I can try? Thanks in advance.
Sidenote- My 1200th post
#3
#4
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the tip RX7withNitrous, but its coming up that the username is invalid.
I forgot to mention corksport. Ive dealt with Ben and Derek before picking up other products from them and it was excellent service but I think purchasing a jspec with no warranty is too much of a risk for me at this point.
I forgot to mention corksport. Ive dealt with Ben and Derek before picking up other products from them and it was excellent service but I think purchasing a jspec with no warranty is too much of a risk for me at this point.
#5
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Spoke to one of the guys at swapjdm.com. Again, cool guys but they say its difficult to get a hold of a S4 block because of its age.........
The search continues..............
The search continues..............
#7
Senior Member
Join Date: Apr 2002
Location: North Seattle
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
If your interested I have a S4 jspec motor I might be getting rid of, I was going to use it to do an N/A to TII conversion but my plans have changed. PM me if interested.
Micheal
Micheal
Trending Topics
#9
earning these was better
Join Date: Mar 2002
Location: Richardson TX
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ctintl.com - A guy in the Dallas RX-7 gang got a S5 motor from them and he is pleased. SingleturboRX7 on the forum.
#10
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
2. No warranty is offered on Mazda rotary, diesel, high performance and racing engine. Racing engines are not street legal.
That statement makes it a little suspect
That statement makes it a little suspect
#11
What Subscription?
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
#12
#13
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Gave Jspecjdm.com a call but no answer.
I tried going to liberusa.com but didnt work. They did have a geocities site by that name but it was under construction.
But I think I found an engine.............
Thanks for all the help guys
I tried going to liberusa.com but didnt work. They did have a geocities site by that name but it was under construction.
But I think I found an engine.............
Thanks for all the help guys
#14
Originally posted by Ni5mo180SX
Gave Jspecjdm.com a call but no answer.
I tried going to liberusa.com but didnt work. They did have a geocities site by that name but it was under construction.
But I think I found an engine.............
Thanks for all the help guys
Gave Jspecjdm.com a call but no answer.
I tried going to liberusa.com but didnt work. They did have a geocities site by that name but it was under construction.
But I think I found an engine.............
Thanks for all the help guys
And shipping was only like $125...
I have seen S4 blocks go as cheap as ~$550 before. S5 vblocks usually go for ~$750.
-Zach
#15
What Subscription?
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
I stand corrected: Here are the correct websites:
http://www.recycler.com/com/liberousa/default.htm
http://www.liberousa.net THIS LINK IS PARTIALLY FUBAR
LIBERO U.S.A., INC
(800) 717-6194
(310) 715-6194
Just got off the phone with them: New shipment arriving next week, S4 TII's are 650.00 + ~170 shipping CA to SC
As always:
RANT ON! JSPEC's ARE NOT MAGICALLY HIGH HP ENGINES, THEY ARE A GOOD BASE CORE FOR DOING A REBUILD.
http://www.recycler.com/com/liberousa/default.htm
http://www.liberousa.net THIS LINK IS PARTIALLY FUBAR
LIBERO U.S.A., INC
(800) 717-6194
(310) 715-6194
Just got off the phone with them: New shipment arriving next week, S4 TII's are 650.00 + ~170 shipping CA to SC
As always:
RANT ON! JSPEC's ARE NOT MAGICALLY HIGH HP ENGINES, THEY ARE A GOOD BASE CORE FOR DOING A REBUILD.