What do YOU want made for YOUR FC???
03-16-04, 11:54 PM
#101
Lives on the Forum
Thread Starter
Originally posted by dDuB
thats a great idea an all, but for those that want to be able to see the idiot cluster it wont work out... so how about one for the idiot light cluster and another one somewhere else (above the radio
) that will also hold 3 hehe
thats a great idea an all, but for those that want to be able to see the idiot cluster it wont work out... so how about one for the idiot light cluster and another one somewhere else (above the radio
) that will also hold 3 hehe
I think a single DIN radio cut-out + triple 2" / 52mm panel under or over that might be doable. The crappy stereo kits I've seen all SUCK! Cheap would be textured ABS plastic, and it's easily covered or painted. Aluminum or any other metal would cost at least 2 to 3 times more.
-Ted
03-16-04, 11:57 PM
#102
Lives on the Forum
Thread Starter
Originally posted by incendui
I'll just add a gauge holder that replaces the two center air vents to the list thats already been said.
I'll just add a gauge holder that replaces the two center air vents to the list thats already been said.
-Ted
03-16-04, 11:59 PM
#103
Lives on the Forum
Thread Starter
Originally posted by Fitness Stain
yes...guage cluster that holds 3 guages, and a single DIN head unit...50 bucks (less preferablly)
yes...guage cluster that holds 3 guages, and a single DIN head unit...50 bucks (less preferablly)
a GOOD molded in cup holder, or one that atleast looks mostly stock....
and a hatch cover that will cover the hatch
kinda like the 3rd gen
kinda like the 3rd gen
https://www.rx7club.com/showthread.p...hreadid=283704
-Ted
03-17-04, 12:01 AM
#104
Oops sorry Reted, I forgot to post what I would be willing to pay;
I would like to see the following things;
1) A triple gauge cluster that replaces the whole apillar cover.--------- $50.00
2) A non factory replacement for the Rear hatch cover ( I am going to work on this when i get the time) --------- $100.00
3) A front difuser plate (under the car venting high pressure air up) --------- $70.00
4) a Nice Vented Hood that isn't Goddy or ricey, just functional ----------- $500.00
5) Rebuilt/Recovered Leather TII seats. --------- $400.00 (each with core exchange)
I would like to see the following things;
1) A triple gauge cluster that replaces the whole apillar cover.--------- $50.00
2) A non factory replacement for the Rear hatch cover ( I am going to work on this when i get the time) --------- $100.00
3) A front difuser plate (under the car venting high pressure air up) --------- $70.00
4) a Nice Vented Hood that isn't Goddy or ricey, just functional ----------- $500.00
5) Rebuilt/Recovered Leather TII seats. --------- $400.00 (each with core exchange)
Last edited by jreynish; 03-17-04 at 12:03 AM.
03-17-04, 12:01 AM
#105
Lives on the Forum
Thread Starter
Originally posted by jreynish
1) A triple gauge cluster that replaces the whole apillar cover.
1) A triple gauge cluster that replaces the whole apillar cover.
2) A non factory replacement for the Rear hatch cover ( I am going to work on this when i get the time)
3) A front difuser plate (under the car venting high pressure air up)
4) a Nice Vented Hood that isn't Goddy or ricey, just functional
3) A front difuser plate (under the car venting high pressure air up)
4) a Nice Vented Hood that isn't Goddy or ricey, just functional
https://www.rx7club.com/showthread.p...hreadid=283704
5) Rebuilt/Recovered Leather TII seats.
-Ted
03-17-04, 12:05 AM
#106
Lives on the Forum
Thread Starter
Originally posted by SonicRaT
As far as I know/have found, nobody makes a kit that includes everything needed to setup an electronic aux port activation, there have been many howto's with lists of parts and so forth, but never a compiled kit to be purchased in one location.
As far as I know/have found, nobody makes a kit that includes everything needed to setup an electronic aux port activation, there have been many howto's with lists of parts and so forth, but never a compiled kit to be purchased in one location.
With the automatic seat belts in place I'd like to see a gauge pod that could fit properly for us s5 folk, i've attempted to modify mine with a heatgun with not so pretty success. Or any other convient, yet not obnoxiously ugly mounting locations for gauges would impress me.
One thing I definatly am not happy with is how old the interior looks, if there was only some way to make it look newer, perhaps brushed aluminum surrounds? I'm not real sure, but if a product could come out that would make the interior look more modern, I'd be willing to pay an small fortune for it. Wether it be a digital gauge cluster replacement, or an entire new gauge surround with modified buttons/dials for lights/so forth.
If you're looking for CF stuff, check out this thread:
https://www.rx7club.com/showthread.p...hreadid=283704
-Ted
03-17-04, 12:06 AM
#107
Originally posted by RETed
I find multi A-pillar gauges annoying to my eyes. Trying to refocus between the gauges really screws my eye up!
I find multi A-pillar gauges annoying to my eyes. Trying to refocus between the gauges really screws my eye up!
Can't you guys get this taken care of with a local uphostery shop?
-Ted [/B]
Jeffrey
03-17-04, 12:13 AM
#108
Lives on the Forum
Thread Starter
Originally posted by AusTexRex
hmm. 1. a digital one guage does multiple functions thing. Press different buttons on the side and the numbers read out on the screen, would be great for temps, average MPG, maybe put a timer function into it. Oh, and having guages that are redlining pop to the front of the screen and make it flash would be good. Like the temp guages. or maybe A/F readings where you could set it to warn on lean or too rich or what not... I understand this would take a lot of work.. but stingy FC drivers worldwide would buy something like this. I know BMW's had something a lot like this, probably still do. (as much as 400-600...800? jesus I don't know, but a whole whole lot)
hmm. 1. a digital one guage does multiple functions thing. Press different buttons on the side and the numbers read out on the screen, would be great for temps, average MPG, maybe put a timer function into it. Oh, and having guages that are redlining pop to the front of the screen and make it flash would be good. Like the temp guages. or maybe A/F readings where you could set it to warn on lean or too rich or what not... I understand this would take a lot of work.. but stingy FC drivers worldwide would buy something like this. I know BMW's had something a lot like this, probably still do. (as much as 400-600...800? jesus I don't know, but a whole whole lot)
2. Battery Relocation Kit. (however much it costs to get the pieces and put a fair markup for you in it)
3. Pop-up light replacement kit (150)
4. Stereo Surrounds that don't break.
5. Classy new taillights. (working on some myself) (200-300)
6. CAI that doesnt' require cutting... possible? (a whole lot)
7. Sideview mirrors that keep a stock design (maybe something a little cooler if you feel the need) but have a mount so they can pivot inwards if they get hit like modern cars. (100)
8. a guage cluster that mounts using a bracket and screws that can be moved or arranged then screwed out to brace the cluster in tight places. If you don't understand what I mean, PM me and I'll explain it. but it would solve the idiot light AND above stereo slot cluster requests at the same time. probably logicon as well.
-Ted
03-17-04, 12:14 AM
#109
Lives on the Forum
Thread Starter
Originally posted by MrSparkle
i would like a cf ecu cover(50-75) and a 4.30(or smaller) ring & pinion/lsd setup in the 1000 range.
i would like a cf ecu cover(50-75) and a 4.30(or smaller) ring & pinion/lsd setup in the 1000 range.
-Ted
03-17-04, 12:18 AM
#110
Lives on the Forum
Thread Starter
Originally posted by anobii
REAL carbon fiber interior pieces- Gauge bezel $60, stereo bezel $100, shifter bezel $50, steering column shroud $30 , ect.
REAL carbon fiber interior pieces- Gauge bezel $60, stereo bezel $100, shifter bezel $50, steering column shroud $30 , ect.
a short shifter that dosent cost as much as a jdm replacement transmission, yeah, that woul be coo...
.$50
.$50
These units are SS and CNC lathe'd, which means production costs are high.
Now for the biggie, spring perches and adjustable collars (no springs) for all four corners to fit eibach 2.5" coils. they would have to be cheaper than ground control, so id say 150 for the set, maybe.
And one more thing, racing seat brackets that actually fit the floorboard of the FC. Oh man, that would be priceless.
-Ted
03-17-04, 12:21 AM
#111
Lives on the Forum
Thread Starter
Originally posted by tie pilot
how about a set of really bitchin race pedals that bolt on (drillin required). if it could include a dead pedal that's a little wider than the stock one, that would also be sweet. $50?
how about a set of really bitchin race pedals that bolt on (drillin required). if it could include a dead pedal that's a little wider than the stock one, that would also be sweet. $50?
Do you mean a totally set of pedals?
Cut the stock pedal bottoms off and put on new ones?
I really like the stock dead pedal. Are you overly tall?
-Ted
03-17-04, 12:24 AM
#112
Lives on the Forum
Thread Starter
Originally posted by Psygnosis7
Definaly some form of a new center console that goes all the way back and includes a cup holder and perhaps a larger 'cubby'
The current console is one of the main things in the car that really help it maintain that 80's look.
Definaly some form of a new center console that goes all the way back and includes a cup holder and perhaps a larger 'cubby'
The current console is one of the main things in the car that really help it maintain that 80's look.
I've seen some of the American (i.e. Ford Explorer) lower arm rests, and they are solid and very strong.
-Ted
03-17-04, 12:27 AM
#113
Lives on the Forum
Thread Starter
Originally posted by Kim
How about a NA/Turbo conversion kit, you know just pipes, flanges and other hardware used to do a N/A-Turbo conversion.
There are alot of people wanting to do it but I think that most wont because of fabrication issues.
I will expect it to be around 399,95$
How about a NA/Turbo conversion kit, you know just pipes, flanges and other hardware used to do a N/A-Turbo conversion.
There are alot of people wanting to do it but I think that most wont because of fabrication issues.
I will expect it to be around 399,95$
Trying to keep the engine alive is a whole nother matter though...
-Ted
03-17-04, 12:33 AM
#115
Lives on the Forum
Thread Starter
Originally posted by Turbo_Rotary
I like the idea of a new under belly pan made out of sheet metal or something. Maybe put some louvers on to pull some heat out of the engine bay.
I like the idea of a new under belly pan made out of sheet metal or something. Maybe put some louvers on to pull some heat out of the engine bay.
-Ted
03-17-04, 12:35 AM
#116
Lives on the Forum
Thread Starter
Originally posted by jon0886
single DIN guage cluster that has a little stealth thing - maybe like a door that comes down over it and covers it - makes it look stock or something.
I hate it when people look into cars then see something "cool" and just crowd over them. STEP AWAY FROM MY F***ING CAR!
single DIN guage cluster that has a little stealth thing - maybe like a door that comes down over it and covers it - makes it look stock or something.
I hate it when people look into cars then see something "cool" and just crowd over them. STEP AWAY FROM MY F***ING CAR!
-Ted
03-17-04, 12:38 AM
#117
Lives on the Forum
Thread Starter
Originally posted by TonyTurboII
Am I the only one who read the posts of Ted saying things he would not make?
Am I the only one who read the posts of Ted saying things he would not make?
https://www.rx7club.com/showthread.p...hreadid=283704
Anyhow, a cuholer would be nice, I think you should try to make one that replaces the trim around the shifter itself instead of the whole stereo surround, it would save on costs, and probably be easy to produce. Just make sure its on the passanger side, and able to hold 32 ounces, lol.
Id also like to see some sort of idiot cluster gauge holder replacement, but one that would hold 3 60mm gauges.
-Ted
03-17-04, 12:43 AM
#118
Lives on the Forum
Thread Starter
Originally posted by M5150
bump steer adjusters, maybe a kit for the steering rack to change the ratio,
bump steer adjusters, maybe a kit for the steering rack to change the ratio,
cheaper bearing control arms (AWR charges 350 per arm)
subframe spacers for the rear,
kit for foam injecting the chassis,
underbody aero kit to cover up the tranny tunnel, stuff like that
If not check out:
https://www.rx7club.com/showthread.p...hreadid=283704
-Ted
03-17-04, 12:46 AM
#119
Lives on the Forum
Thread Starter
Originally posted by theonlygreat
I want a quality TID made out of aluminum. i saw one at banzairacing i think, but they are on back order or sold out. they sell theirs for $150 which is a little on the high side... especially if you have to wait for them to make more. i have yet to find one for sale elsewhere.
I want a quality TID made out of aluminum. i saw one at banzairacing i think, but they are on back order or sold out. they sell theirs for $150 which is a little on the high side... especially if you have to wait for them to make more. i have yet to find one for sale elsewhere.
polished aluminum pipe
2 or 3 layer reinforced silicone hoses, in three colors (blue, yellow, red)
-Ted
03-17-04, 12:48 AM
#120
Lives on the Forum
Thread Starter
Originally posted by 13bpower
What I would want is a anti barbacue kit. A kit that replaces all the rubber fuel lines in the engine bay with some SS lines or something like that. THe kit would have the option of coming with a PD replacement Banjo bolt. The kit would include all the hardware to do the job (lines , fittings, ect>). A reasonable amount of fabrication is fine. Stock rails would be kept, may be an option for a aftermarket FPR (FPR not included in the kit). I could see myself paying $150 for that.
What I would want is a anti barbacue kit. A kit that replaces all the rubber fuel lines in the engine bay with some SS lines or something like that. THe kit would have the option of coming with a PD replacement Banjo bolt. The kit would include all the hardware to do the job (lines , fittings, ect>). A reasonable amount of fabrication is fine. Stock rails would be kept, may be an option for a aftermarket FPR (FPR not included in the kit). I could see myself paying $150 for that.
-Ted
03-17-04, 12:52 AM
#122
Lives on the Forum
Thread Starter
Originally posted by f1blueRx7
Don't you wanna see those gauges when you drive? Mine are down at my stereo and glancing there is a pain as it is.
Don't you wanna see those gauges when you drive? Mine are down at my stereo and glancing there is a pain as it is.
-Ted
03-17-04, 12:56 AM
#123
Lives on the Forum
Thread Starter
Hey guys, Dave Gibson from FC3S.Org has started another thread that covers CF stuff and most cosmetic and panels here:
https://www.rx7club.com/showthread.p...hreadid=283704
Check that thread out if you're looking for carbon fiber and body kit stuff!
-Ted
https://www.rx7club.com/showthread.p...hreadid=283704
Check that thread out if you're looking for carbon fiber and body kit stuff!
-Ted
03-17-04, 01:18 AM
#124
Originally posted by RETed
There are kits popping up in Japan - one is called "Pengiun". Maybe they might make it to the U.S., or you can contact any composite shop that handles plastics.
-Ted
There are kits popping up in Japan - one is called "Pengiun". Maybe they might make it to the U.S., or you can contact any composite shop that handles plastics.
-Ted
