Oh, I won't even go into that.
Centrifugal SC's are like $2,000+, so it goes up from there.
Keeping the engine alive is a whole nother matter.


-Ted

 

A less restrictive air flow meter.
I'd pay $100 for it.

 

quote:
--------------------------------------------------------------------------------
Originally posted by MaYnard5000
A neon underbody kit yo!
--------------------------------------------------------------------------------

Actually, the correct RX-7Club answer would be:

God hates you. Go kill yourself.

 

1000$ on the hardtop ? .. what does a miata hardtop cost ?

a hardtop would rule for us poor souls that live up north and still drive cabrios ...

also ...

a track approved, cool looking roll bar thingy for the cabrio. (think there are some already)

/bo

 

I just the center console for cup holder, it work pretty good

 

i would love lambo style doors and would pay 1000.00 and a automatic rear hatch opener, you know, with a aftermarket remote, just pop it open. hummmmm

https://www.rx7club.com/photo/showga...p?ppuser=44780

 

Things I would like to be seen made.

I would like a nice ITB setup made that can be purchased with manifold, throttle bodies, velocity stacks, tps mounting, fuel rails ... for a good price and in the US

along with that, a nice turbo plentum to go over it for us turbo cars. (currently the only people I know making these products are in australia and they want alot of cash for the entire setup)

I would like to see some better roll cages made.

Fiberglass doors (yet fully functional doors) , fiberglass and lexan rear hatch, s5 stock front lip (no one sells these anywhere!!)

Basically anything other than that would have to be custom made for the current application. Mass producing some things would be worthless.

so thats my .2 cents!

 

yeah I am in between buying a new house with a big garage. That is if i can sell one of my condo's. But I have a few friends that are going to just basically work in my garage on products like this. I am still searching for a fiber glass/plastic guy who can copy body kits and **** like that. Also I own a vert so I was going to see if we could work on a fiberglass hardtop. I have a roll bar in the works now. And if I can ever get in with someone who make CF parts I would be unstopable.

 

i have a link to cf diffuser http://rxecret7.com/reamfcreardi.html

 

Go look at the oil filter pedastel on a ~90 Nissan Maxima. They have a drip guard that channels the oil to fall in a specific free area, I'd love one of those!

 

What about a tinted see-through sun roof kit that works without any modifications?

 

a radio serounding with cupholder fibered to the pass side (just a little lower to alow the glove comparment to open) $150-$300 (better than a s5 about the same price!)

The rear hach cover thing with hach divider in CF or FG. ($300-700)

reworked cpu ($100) (ie NEW works better than rig)

the gauge thingy cover (where the light switch and wipers are) designed with a digi-speedo on top and a digi odo/trip meter on the sides of the speedo. ($200-$500)

logicon digi relay (to plug in to a PC or relocated button logicon. ($100-$200)

all the stupid vent covers!!!! (the trinagle ones the defrost one etc) ($30 each-$50 each )

metal shifter plate with a bushing kit something nice polished ss with the rotory logo on it (sorry dont like lether shifter boots) ($100-$200)


uhm ja stuff I would like.


Mage

 

what about a T4 flange tubular steel exhaust manifold that has nice welds and actually fits for under 800 bucks?

 

Something to make my exhaust quieter than a lawn mower when idling and isn't restrictive.

-Andrew

 

double post...

 

Either of these would be awesome. A panel that goes right above an aftermarket single din cd player that holds 3 2 1/16" gauges in a row, or an entirely new piece that will hold the deck and 3 gauges above it. Either of those would be greatly appreciated by me since 1fastt2 isn't here anymore making them

As for what its made out of, aluminum works, but if something else is cheaper or easier thats good too, im not too picky. Once I get boosted (with either the camden supercharger or fc3s.org turbo kit) I'm going to want to run a total of 5 gauges, so after the double gauge mount on the a-pillar I dont have many options left.

 

oh i like that idea too

 

how about a switch panel that controlls the light, signal indicators, wipers etc

 

Struts for the hood instead of a prop bar.

 

An alternative intercooler kit to greddy for under 1000 would be no. 1 on my list and it doesn't have to be 234542342 rows either. Just one that is efficient for a t04 series turbo ( I can see this taking alot of R&D time)

I'd like to add my support for the gauge cluster that rotary resurrection described.

How about some t04 oil flanges with AN fittings already welded on instead of 1/2 NPT to AN.



Lower on my list is a replacement under engine pan, I know these are hard to find and mostly broken. Perhaps something that has some built in sheilding that would cover the motor mounts from oil being spilled all over them. Maybe put a flap on it for draining coolant without having to remove the whole peice.

 

TID.
Smoked plastic sunroof replacer
MAF kit that flows well.
3" bolt in hi flo cats
fitted blank panel for center DIN area
Something to fix this ******* oil leak for good!!!!
Rear STB: cutting OK
Cheap 15-25mm spacers
** Dual exhausts are for NAs and twin turbos or piston engines with two banks of cylinder heads, i dont know about you but my turbo only has one outlet.

 

someone already made this

(sunroof, that is)

 

reupholstery kits
(like the ones in the vb catalog)
in a wider variety of colors though

200-500 bones

 

yes but i dont believe it was smoked, it was perfectly clear if i recall

 

do you have a link?