Seats... Anyone know what stock seats weigh?

I've got Corbeau Tara RS seas in my car now that weigh 27lbs each. (dropped bout 75lbs in my Probe with those)

 

i just found tons of extra weight! ill remove it tomorrow and hit the scales again and let ya guys know..

 

Where? Inquiring minds want to know.

PaulC

 

i found under the dash a bunch on sound deadening stuff and under all the front carpet and i think i saw something in the door that could do some damage! well see

 

I'm suprised no one mentioned RETeds weights page
http://fc3s-pro.com/TECH/weights.htm

 

I weigh 135 lbs.

Muhahahaha!!

<---- walking weight reduction

 

try running a few more miles each day fatty!

 

maybe its time to start looking for an aluminum hood?

 

Ah yes, I forgot. I had Corbeau Forzas in my Base. I weighed them and the base seats, I think it was a bit less than 10lbs each difference- not a bunch, but they weren't barfing their stuffing all over like the stock seats and they really held me in. The TII seats are much better for holding me than base seats, but probably weigh a bit more. When I get sick of GT3 and force feedback I might put the Forzas in my TII :-)

 

There's sound deadening that's "permanently" attached to the floor that you can yank, got about 25+ lbs off of my '80 race car.

Here's what you do:
1. Go buy some dry ice (a few pounds is good enough)
2. Pull up the carpet
3. Take the dry ice and break it up and drop it on the floor by the sound deadening crap. You can (IF YOU'RE WEARING GLOVES) push it down and move it around on the sound deadening to make sure it gets REALLY cold.
4. Pull out ye 'ole hammer
5. Strike the sound deadening with the hammer.
6. Watch the sound deadening chip into pieces.
7. Pull out ye 'ole shop vac
8. Vacuum up the crap.
9. Weigh the crap. Say "stupid people who like cars to be 'comfortable', what a waste of weight".

 

i managed to get a lot of sound deadening material out by just pulling today... lots of junk came out of the back... i removed the 2 cubbys and found more under there and some plastic/ fiberglass stuff.... quite a bit of stuff came out! cant wait till i do the front!

 

I swear my carpeting and sound deadener weighed a ton, also it was very damp. My list to date

replaced all carpeting/deadener with rubberized bedliner
headliner
replaced seats with nex seats
aentenna motor
rear wiper motor
rear wiperfluid can
carbon fiber hood
replaced door panel inserts with carbon fiber
replaced center console etc with carbon fiber pieces
storage bins
ac
cold start fluid bottle thing
underpan

But I added a roll cage, and a body kit.

 

I just need to lose about 50 lbs myself, and that should do mine a world of good! anyone else out there a bit chunky? we need to start running ourselves to make our cars faster!
God Bless
<>< Matt ><>

 

Where did you get the carbon fiber hood? Do you have any pics of it?

 

when I weighed my 87 T2 at the track is was 2950 with me in the car ( im 195 ) and 1/4 tank of gas

abs removed ( like 50 pounds!!)
air pump and cats and spare tire

Im going to be taking off the a/c and powerstreeting and sound deading.

and putting in a roll cage I wounder how much a cage weighs

i want to get the car down to 2700 with me in it.

 

980KG...read it and weep fatty. Tyler, I think your car needs some rust to get that weight reduction started. Just wait until I rent that grinder for a weekend.

 

I made my CF hood, but it doesnt look good enough to sell them. Too wavy

 

boost, any plans for CF door skins? could shave another 40lbs both sides.

 

My car - empty weight 2140# !!!!
Yes it is a race car only but there are some strange places that I lost weight, The stock winshield weighs 17# more then the Lexan one. Hood (glass) -25, doors -30 (gutted stock), sound tar -35#, that **** is all the way up the fire wall. dash board -40#, seats ? Battery ( I use a smaller one from a honda) Header, the stainless one weighs 1/2 as much as the steel. Keep searching the weight is everywhere...

 

EProdRx7 - Do you have the rear lexan hatch also? Just curious about the amount of weight saved there.

 

A single exhaust weighs about 30 pounds less than a dual!

 

Samps, how much did you pay for the 6" round ultra flow. Is it fairly quiet at idle? Shops around here quoted me b/w $150 and $300 for just the muffler alone.

 

FPrep2ndGenRX7
Yes I do and it uses the steel frame with a lexan insert. Haven't weighed it but it has to be at least 30# lighter. I made it myself from 1/8 lexan as opposed to the Motorsport one which is 3/16 and a lot heavier.

 

just removed rear steel bumper, the two steel tow hook things under spare tire well and muffler shields 28 lbs.
Exhaust manifold and cats 38 lbs.

shootin' for 2300