2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

warning buzzer problems

Thread Tools
 
Search this Thread
 
Old Nov 26, 2006 | 02:54 PM
  #1  
sidewayz_FC's Avatar
Thread Starter
Pushrods
Tenured Member 15 Years
 
Joined: Nov 2006
Posts: 271
Likes: 0
From: kennewick, wa
warning buzzer problems

forgive me if this is a n00b question but when i take sharp turns, enough for the dtss to work, my warning buzzer goes off?? the oil pressure is good and no lights go off ( all turn on when key is on so its not that the lights arent working), the car is a 87 gxl btw, im wondering if this is a common electrical problem or what its got me stumped
Reply
Old Nov 26, 2006 | 02:56 PM
  #2  
My5ABaby's Avatar
Rotaries confuse me
Tenured Member 10 Years
iTrader: (7)
 
Joined: May 2006
Posts: 4,219
Likes: 3
From: Murfreesboro, TN
Put oil in your car, it's low.

/thread
Reply
Old Nov 26, 2006 | 03:02 PM
  #3  
notaless's Avatar
Menlo Mazda Parts Guy ^_^
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 69
Likes: 0
From: San Fransico - DalY City
Or you might wanna check to make sure you have coolent.

That or its the idiot buzzer that says yur key is loose.
Reply
Old Nov 26, 2006 | 03:02 PM
  #4  
sidewayz_FC's Avatar
Thread Starter
Pushrods
Tenured Member 15 Years
 
Joined: Nov 2006
Posts: 271
Likes: 0
From: kennewick, wa
damnit.. quart low, just put a quart in like 500 miles ago, coolant is good just got changed, ill have to go see if its fixed
Reply
Old Nov 26, 2006 | 03:04 PM
  #5  
My5ABaby's Avatar
Rotaries confuse me
Tenured Member 10 Years
iTrader: (7)
 
Joined: May 2006
Posts: 4,219
Likes: 3
From: Murfreesboro, TN
Originally Posted by notaless
Or you might wanna check to make sure you have coolent.

That or its the idiot buzzer that says yur key is loose.
The coolant buzzer has a delay on it of ~15 seconds (Hailer's knows the exact time). So, unless he's doing donut's for a long time, it's not that.

The oil idiot light probably isn't coming on becase it doesn't work right.
Reply
Old Nov 26, 2006 | 03:07 PM
  #6  
sidewayz_FC's Avatar
Thread Starter
Pushrods
Tenured Member 15 Years
 
Joined: Nov 2006
Posts: 271
Likes: 0
From: kennewick, wa
all idiot lights seem to be good
Reply
Old Nov 26, 2006 | 03:08 PM
  #7  
My5ABaby's Avatar
Rotaries confuse me
Tenured Member 10 Years
iTrader: (7)
 
Joined: May 2006
Posts: 4,219
Likes: 3
From: Murfreesboro, TN
Originally Posted by sidewayz_FC
all idiot lights seem to be good
Well, the buzzer comes on for 3, and only 3, reasons.

1. Redline (at or above).

2. Low coolant. This buzzer has a delay on it, as mentioned above. (And I think it was Hailers, if not, oh well)

3. Low oil. When low oil is sensed by the oil level sensor, the buzzer goes off immediately.

Last edited by My5ABaby; Nov 26, 2006 at 03:14 PM.
Reply
Old Nov 26, 2006 | 05:35 PM
  #8  
sidewayz_FC's Avatar
Thread Starter
Pushrods
Tenured Member 15 Years
 
Joined: Nov 2006
Posts: 271
Likes: 0
From: kennewick, wa
it was definitely oil, went and changed the oil and filled it up and it stopped making it, again sorry for the noobage but im new to the rotories

thanks for help
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
86glxNA
New Member RX-7 Technical
2
Sep 15, 2015 04:20 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 08:09 AM.