2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Very oddd Hmm, please read. Oil? Vac lines?

Old Apr 19, 2003 | 02:47 AM
  #1  
DC350's Avatar
Thread Starter
Rotor Head
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 1,966
Likes: 0
From: British Columbia
Very oddd Hmm, please read. Oil? Vac lines?

My engine currently rhas about....55,000 kms

Its sucks at turnin on in the morning. Sometimes it smokes when i rev then engine really high tonight i redlined it and no smoke, same with 2nd. How would i go about checkin to see if the crank case ventalation system is hooked up?

Vac leak causing hard start? I have to keep my foot on the pedal to keep it going or it will stall. Then it will do its 3k warm up until it reaches 600 rpm where it idles..


Anyone shed any light on my little engine problems?

Thanks, Evan
Reply
Old Apr 19, 2003 | 02:51 AM
  #2  
TheBigOne's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Mar 2002
Posts: 174
Likes: 0
From: 415 -> 707
n/a or turbo?.
Reply
Old Apr 19, 2003 | 03:19 AM
  #3  
DC350's Avatar
Thread Starter
Rotor Head
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 1,966
Likes: 0
From: British Columbia
n/a
Reply
Old Apr 19, 2003 | 03:25 AM
  #4  
1987RX7guy's Avatar
Eat Rice Don't Drive it.
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
After I removed my rat's nest and left my BAC un-plugged my idle got better and she starts up great now. Before I would have to keep he alive with my foot on the gas for about two minutes. Now almost nothing. Maybe 20 seconds and then she will hold an idle. This I think means that some of the old vac lines were obviously cracked. Replace all your lines. About the smokind I don't know but mine will smoke somtimes when I redline second when not letting it warm up properly.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
andyvideopro
General Rotary Tech Support
3
Aug 20, 2015 10:55 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:29 AM.