Very oddd Hmm, please read. Oil? Vac lines?
#1
Rotor Head
Thread Starter
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Very oddd Hmm, please read. Oil? Vac lines?
My engine currently rhas about....55,000 kms
Its sucks at turnin on in the morning. Sometimes it smokes when i rev then engine really high tonight i redlined it and no smoke, same with 2nd. How would i go about checkin to see if the crank case ventalation system is hooked up?
Vac leak causing hard start? I have to keep my foot on the pedal to keep it going or it will stall. Then it will do its 3k warm up until it reaches 600 rpm where it idles..
Anyone shed any light on my little engine problems?
Thanks, Evan
Its sucks at turnin on in the morning. Sometimes it smokes when i rev then engine really high tonight i redlined it and no smoke, same with 2nd. How would i go about checkin to see if the crank case ventalation system is hooked up?
Vac leak causing hard start? I have to keep my foot on the pedal to keep it going or it will stall. Then it will do its 3k warm up until it reaches 600 rpm where it idles..
Anyone shed any light on my little engine problems?
Thanks, Evan
#4
Eat Rice Don't Drive it.
iTrader: (3)
After I removed my rat's nest and left my BAC un-plugged my idle got better and she starts up great now. Before I would have to keep he alive with my foot on the gas for about two minutes. Now almost nothing. Maybe 20 seconds and then she will hold an idle. This I think means that some of the old vac lines were obviously cracked. Replace all your lines. About the smokind I don't know but mine will smoke somtimes when I redline second when not letting it warm up properly.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM