vert harness bar?
#4
I'll blow it up real good
iTrader: (1)
Kirk Racing makes the roll bar hoop with or without the harness bar. Both versions allow the top to function normally. You wuld have to contact Kirk Racing as they no longer have the bar listed on their website I believe.
Here are some pics:
http://www.cabrio7.org/mods/rollbar/
http://www.fc3s.org/how_tos/safety/c...e_rollbar.html
Here are some pics:
http://www.cabrio7.org/mods/rollbar/
http://www.fc3s.org/how_tos/safety/c...e_rollbar.html
#6
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
nm i got to a com. where i could check the price.
- i looked at the pic and was wondering about the horizontal bar, and you couldent put a harness on that due to the fact that it is lower than your sholders right?
- i looked at the pic and was wondering about the horizontal bar, and you couldent put a harness on that due to the fact that it is lower than your sholders right?
#7
Still learning
Join Date: Dec 2003
Location: Elk Grove, CA
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
no, you can mount a harness around the horizontal bar....heres a link to the page with the roll bar you want: http://www.ioportracing.com/Merchant...ry_Code=AP6590
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
do you have this set up so i know it works with the vert well, and so i can see if the top still works.
-also, would the passenger seat still work fine with the cross bar?
-also, would the passenger seat still work fine with the cross bar?
#10
I'll blow it up real good
iTrader: (1)
Originally Posted by Cobra_R
no, you can mount a harness around the horizontal bar....heres a link to the page with the roll bar you want: http://www.ioportracing.com/Merchant...ry_Code=AP6590
#12
I'll blow it up real good
iTrader: (1)
Originally Posted by RX drift
-not even if you take off the targa first?
Also, the supports that go back to the rear strut towers will make it difficult to install. Not impossible by any means.
#13
Still learning
Join Date: Dec 2003
Location: Elk Grove, CA
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
the bar pictured is not the exact bar you will receive tho.....u have to select the convertible top option in the roof type box....thats the one i ordered and have in my vert....and the vert version comes with only the harness bar addition in that picture....not the diagonal bar or head restraint....
#14
Senior Member
Thread Starter
Join Date: Aug 2005
Location: willis, VA
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cobra_R
the bar pictured is not the exact bar you will receive tho.....u have to select the convertible top option in the roof type box....thats the one i ordered and have in my vert....and the vert version comes with only the harness bar addition in that picture....not the diagonal bar or head restraint....
-can you post pics?
#16
I'll blow it up real good
iTrader: (1)
Originally Posted by Cobra_R
the bar pictured is not the exact bar you will receive tho.....u have to select the convertible top option in the roof type box....thats the one i ordered and have in my vert....and the vert version comes with only the harness bar addition in that picture....not the diagonal bar or head restraint....