2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

which upgraded ecu

Thread Tools
 
Search this Thread
 
Old May 6, 2004 | 09:24 PM
  #1  
91mazdarx7's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
 
Joined: Mar 2004
Posts: 1,575
Likes: 0
From: pennsylvania
which upgraded ecu

hey im beginning my n/a to tII swap and for a ecu i was thinking of upgrading it to an aftermarket one but which one is the best for under $800 i wont have any mods to the engine except for a rebuild new exhaust and ported so far i want to upgrade the ecu now instead of later i want it to be a good one that will give me the most power out of it and will work good with further mods later on to the engine please send links so i can look at them thanks
Reply
Old May 6, 2004 | 09:28 PM
  #2  
razorback's Avatar
You've Been Punk'd
Tenured Member 10 Years
 
Joined: Jun 2002
Posts: 4,727
Likes: 1
From: Branson, Missouri
haltech
Reply
Old May 6, 2004 | 09:29 PM
  #3  
91mazdarx7's Avatar
Thread Starter
Rotary Freak
Tenured Member: 20 Years
 
Joined: Mar 2004
Posts: 1,575
Likes: 0
From: pennsylvania
any links
Reply
Old May 6, 2004 | 09:34 PM
  #4  
DigitalSynthesis's Avatar
Always something...
Tenured Member 05 Years
 
Joined: Aug 2002
Posts: 944
Likes: 0
From: Atlanta, Ga USA
http://www.haltech.com <- the official site

Vendors/tuners:
http://www.hitman.hm <- regarded as one of the best
http://www.fc3spro.com <- REted here on the forum.
http://www.kickyride.com
http://www.rx7.com

Also search this site there is even a forum designated for aftermarket fuel computers.
Reply
Old May 7, 2004 | 12:13 AM
  #5  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
Where can you get a Haltech E6 for under $800 USD?

I think the closest thing to that budget is a Microtech LT8, which sells for just over $800.
http://www.rx7store.net/product.asp?0=208&1=297&3=791

Make sure you keep in mind tuning and installation costs, which will run at least another $500. A standalone EMS is NOT something that just anybody can install and tune.

I recommend buying whichever EMS has support in your area.
Reply
Old May 7, 2004 | 03:51 AM
  #6  
onefastrx7turbo's Avatar
Merovingeon
Veteran: Air Force
Tenured Member: 20 Years
Liked
Community Favorite
iTrader: (5)
 
Joined: Aug 2002
Posts: 905
Likes: 9
From: Arizona
Http://www.motec.com
Reply
Old May 7, 2004 | 07:01 AM
  #7  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
Originally posted by onefastrx7turbo
Http://www.motec.com
If you can legally get a Motec EMS and wiring harness for under $800 USD, I will take 10 please.
Reply
Old May 7, 2004 | 07:47 AM
  #8  
onefastrx7turbo's Avatar
Merovingeon
Veteran: Air Force
Tenured Member: 20 Years
Liked
Community Favorite
iTrader: (5)
 
Joined: Aug 2002
Posts: 905
Likes: 9
From: Arizona
D'oh!! I didnt catch the under 800 line..my apologies..so, for around 800 or less. maybe power fc?
Reply
Old May 7, 2004 | 06:49 PM
  #9  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
Originally posted by onefastrx7turbo
so, for around 800 or less. maybe power fc?
The US models of the Power FC will only work on a 93-later RX-7, and also it sells for $1,200-1,500 USD.

Keep trying
Reply
Old May 7, 2004 | 07:00 PM
  #10  
razorback's Avatar
You've Been Punk'd
Tenured Member 10 Years
 
Joined: Jun 2002
Posts: 4,727
Likes: 1
From: Branson, Missouri
ebay has (or had last night) a haltech for 777$ as the highest bid. they also have a wold for 1k..i really really wish i had 1k..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SCinfidel
3rd Generation Specific (1993-2002)
4
Sep 8, 2015 05:36 PM
nkuhajda
New Member RX-7 Technical
2
Sep 7, 2015 04:07 PM
dillrx7
Single Turbo RX-7's
3
Sep 7, 2015 09:38 AM




All times are GMT -5. The time now is 05:17 PM.