eyecandy

iTrader: (19)

Anyone know how to upgrade the E-Brake cables, basically to make them beefier.

Tofuball

Why?

Just replace them with thicker cable if thats what you mean?

eyecandy

iTrader: (19)

Well bascially thats it, but how and what cables should I get? And I am sure I would need a new/bigger spring...

Tofuball

The bigger springs: only if you want it to be harder to pull.

You can pick up cable at almost any large hardware store

Kenteth

replace the flexible cabiles with rebar, that should do the trick.

eyecandy

iTrader: (19)

oh cool! I didn't know you could use ANY cable.... Thanks! Why would I want to use rebar? Rebar as in solid rod?

Tofuball

I'm SURE he's being sarcastic.

eyecandy

iTrader: (19)

Hehe I hope!

Cory Simpson

What is the point of doing this?

Tofuball

Yeh, I was wondering that myself.

Scott 89t2

so when he Mad DRifTs with his e-brake it won't brake when he pulles too hard.......

eyecandy

iTrader: (19)

Damn right! Isn't that some kind of double negative? Hehe

Besides some times I am a dumbass and forget to disengage the ebrake, alot of that is because I usually leave it in gear when I park it, then when I am on a slight hill or a place I do not feel comforable just leaving it in gear I use the brake and forget about it...

I also need to replace them, so I thought why not get bigger cables...

White_FC

I say replace it with some good nylon fishing leader material, be a sport, don't use metal cable! Give those calipers a sporting chance to be free from the pressure!

I think you should really be more allert to the status of your handbrake and wether it is enguaged or not before attempting to drive off