2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

uh oh, coolant leak problem!!!!!!!

Thread Tools
 
Search this Thread
 
Old Nov 26, 2007 | 08:18 PM
  #1  
island-fc's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2007
Posts: 95
Likes: 0
From: Vancouver, Canada
uh oh, coolant leak problem!!!!!!!

my coolant is leakin between the engine and the tranny.........
Reply
Old Nov 26, 2007 | 08:23 PM
  #2  
RB_eater's Avatar
Leah Dizon > Roast Beef
Tenured Member 05 Years
iTrader: (1)
 
Joined: Feb 2007
Posts: 1,006
Likes: 0
From: Québec
Check the hoses and replace the faulty ones. It's not that hard is it? If your unlucky though it might be the heater core.
Reply
Old Nov 26, 2007 | 08:27 PM
  #3  
island-fc's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2007
Posts: 95
Likes: 0
From: Vancouver, Canada
i routed the hoses around the heater core so it bypasses it but i cant find a leak in any of the hoses, but when i fill up the rad it pours out between the engine n tranny
Reply
Old Nov 26, 2007 | 08:28 PM
  #4  
311unity13B's Avatar
That's JDM tight, yo
Tenured Member 15 Years
 
Joined: Nov 2003
Posts: 1,599
Likes: 0
From: Atlanta
check the hose that goes right under the upper intake manifold in the back near the firewall, mine leaked from there once
Reply
Old Nov 26, 2007 | 08:55 PM
  #5  
BFGRX7's Avatar
Well, DAMN!
iTrader: (2)
 
Joined: Nov 2003
Posts: 533
Likes: 0
From: W. Orlando
what 311unity said. I had the same problem this weekend. It took 45 minutes to fix start to finish.

~M
Reply
Old Nov 26, 2007 | 08:59 PM
  #6  
melicha8's Avatar
Mazdaspeeding
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2006
Posts: 331
Likes: 0
From: Sacramento
You have a leak the block outlet to the air control valve and thermowax pellet. Take off your uim/tb and reconnect it
Reply
Old Nov 26, 2007 | 10:30 PM
  #7  
island-fc's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2007
Posts: 95
Likes: 0
From: Vancouver, Canada
ya i fixed it, it was a little coolant hose under the intake manafold
Reply
Old Nov 26, 2007 | 11:54 PM
  #8  
TurboMazdaSpeed's Avatar
1.3L piston eater
Tenured Member 10 Years
 
Joined: Nov 2006
Posts: 514
Likes: 3
From: Vancouver, Canada
that hose went 3 times on my TII... i got so enoyed i just blocked it off and havent had any troubles since then
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM
gabescanlon
3rd Generation Specific (1993-2002)
4
Sep 5, 2015 12:04 AM
FührerTüner
General Rotary Tech Support
3
Sep 4, 2015 01:41 PM




All times are GMT -5. The time now is 12:01 PM.