RX7Club.com - Mazda RX7 Forum

2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

turn over ?

Thread Tools
 
Search this Thread
 
Old Dec 5, 2005 | 06:58 PM
Share
  #1  
Johnguitar321's Avatar
Johnguitar321
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 34
Likes: 0
From: Hesperia, ca
Question turn over ?
is there a pully i can turn to turn the e shaft?
Reply
0
Old Dec 5, 2005 | 07:33 PM
Share
  #2  
Johnguitar321's Avatar
Johnguitar321
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 34
Likes: 0
From: Hesperia, ca
/
Reply
0
Old Dec 5, 2005 | 08:32 PM
Share
  #3  
Johnguitar321's Avatar
Johnguitar321
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 34
Likes: 0
From: Hesperia, ca
help
Reply
0
Old Dec 5, 2005 | 08:50 PM
Share
  #4  
Funkspectrum's Avatar
Funkspectrum
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (5)
 
Joined: May 2003
Posts: 4,683
Likes: 30
From: Santa Rosa, CA
main pulley....
Reply
0
Old Dec 5, 2005 | 08:58 PM
Share
  #5  
Johnguitar321's Avatar
Johnguitar321
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 34
Likes: 0
From: Hesperia, ca
any picks? sorry im a noob
Reply
0
Old Dec 5, 2005 | 09:25 PM
Share
  #6  
KompressorLOgic's Avatar
KompressorLOgic
I
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2004
Posts: 3,755
Likes: 12
From: Spanaway, WA
no, there is no such pully you can turn the eshaft with, the eshaft isnt conected to anything, all the pullys conected to the belts spin on a main pully, which isnt conected to anything either....
Reply
0
Old Dec 6, 2005 | 07:05 AM
Share
  #7  
buttsjim's Avatar
buttsjim
Senior Member
Tenured Member 20 Years
 
Joined: Mar 2002
Posts: 637
Likes: 2
From: San Antonio TX
If your belts are on, you can just pull on the belt (don't pinch your fingers). If you need to do a lot of turning, it's easy to remove the fan and then use a 19 mm (IIRC) on the bolt on the eccentric shaft.
Reply
0

Trending Topics

Old Dec 6, 2005 | 12:57 PM
Share
  #8  
nopistons's Avatar
nopistons
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 691
Likes: 0
From: new jersey
Originally Posted by kompressorlogic
no, there is no such pully you can turn the eshaft with, the eshaft isnt conected to anything, all the pullys conected to the belts spin on a main pully, which isnt conected to anything either....
^ That must be the 13B-Zen engine that Mazda's been working on. It also uses a lot of fuel and it uses no fuel, because the rotors do exist, and they do not exist. "What is the sound of one rotor spinning?"
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Buzzing sound when steering wheel is turned right
RyanFox
New Member RX-7 Technical
7
Sep 18, 2015 09:09 PM
Electrical & Idle problems with 1985 Rx-7 12A
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
Best way to Tap into Turn Signals for Indicators?
Farkel
3rd Generation Specific (1993-2002)
4
Sep 16, 2015 06:16 PM
Electrical & Idle problems with 1985 Rx-7 12A
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
AC button and PFC
RE-Mamamia
3rd Generation Specific (1993-2002)
1
Sep 11, 2015 02:13 PM
Back to Subforum
2nd Generation Specific (1986-1992)
View Next Unread
5 lug to 4 lug conversion?




Advanced Search

All times are GMT -5. The time now is 09:38 AM.