does anyone have a pic showing the turbo II oil and water inlets and outlets on the stock turbo. im 99% sure, but i dont wanna F*** it up tomorrow when i start WOOT!


thanks, k-rok

 

i would kinda dry fit it .. i know the lines are kinda hard to screw up. but to help you out some , the line that has a flange on the opposite end of the banjo bolt mounts to the LIM and the banjo bolt faces the passenger side fender.

the other one is feed from the water pump /water pump housing. its a banjo bolt with a open steel line. that is mounted facing the drivers side fender. and is attached on the open end with a small peice of hose.

in fact my coolant line started to leak today . so ill be pulling the turbo tomorrow to inspect it

 

Scroll down this thread--it shows all the lines for the stock s4 turbo:

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/picture-request-relatively-stock-t2-bay-404349/