Where can i get flanges that will bolt to the series 5 turbo's oil and coolant inlets that i can adapt an an fitting adapter to

i found these but im not sure if they will work on the s5 turbo

http://www.atpturbo.com/Merchant2/me...egory_Code=OIL

 

anyone.....

 

I have them on my S5 engine. I do not have the AN lines installed yet or the engine running. ATP also sells to order AN oil lreturn lines. I got mine in the mail today.

Thanx

Michael

 

these work perfectly for the oil side. in fact buy an extra to make it bolt right to the front cover.

try www.turbosdirect.com

They are Garret certified as well(++!)

They don't have a website up yet but they rebuilt my turbo for cheap and helped my friend out w/ couplers. Just let them know you were referred by the Rx7 club. The more they hear from us the better they might be to us.

 

i would do that to bolt to the front cover, but i am turboing a 6 port 13b in my gsl-se so i am tapping the front cover for the turbo oil drain, but i will be using an -an fitting in the hole i tap
-greg