Turbo 2 Primary Injectors?
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: Grafton WV
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Turbo 2 Primary Injectors?
I just got my jspec in my car and ready to start now it dont run right or at all. it remined me of my old car when the back seals were blown, like its only runnin of the front rotor, so im thinking maybe primary injectors. Reason i think this is there is three lines all have the same connections going to the primary injectors and what i think is the coolent temp senser. what im thinking is i hooked up one connection to the coolent temp instead of a injector. Cause when i turn on the igntion one of the injectors (Ithink Its one of them) makes this click click click sound. Is there any way to check those wire and tell the diff from injector lines and that water temp senser?
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
I answered your earlier post saying Yes, you can cross them. I also gave the plug wires and color for each injector plug. You should be able to work it from there. The alternative to pulling the intake, is to go to the ECU and ringing the injector wires from there.
#3
Senior Member
Thread Starter
Join Date: Mar 2001
Location: Grafton WV
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Hey i just thought of something else i was not sure but it looked right in side the car where the wiring harness goes to the computer, there is also 2 plugs exactly the same shape and size how do you tell witch one goes where? Would that have anything to do with it runing extremely bad?
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM