which trim compressor wheel is this?
Thread Starter
Joined: Mar 2007
Posts: 3,596
Likes: 2
From: Fort Worth, TX
which trim compressor wheel is this?
After reading Hypertek's thread about building a hybrid turbo, and my own turbo starting to go out on me; I've decided to build my own hybrid.
I've got a spare s4 turbocharger sitting around, and a full t3 rebuild kit on the way from gpop.... so I need a backing plate, the housing and a compressor wheel. I found this wheel for sale from a supplier, it says to4b to4e... but doesn't specify a trim. Any clues?
I've got a spare s4 turbocharger sitting around, and a full t3 rebuild kit on the way from gpop.... so I need a backing plate, the housing and a compressor wheel. I found this wheel for sale from a supplier, it says to4b to4e... but doesn't specify a trim. Any clues?
Thread Starter
Joined: Mar 2007
Posts: 3,596
Likes: 2
From: Fort Worth, TX
Joined: Oct 2003
Posts: 1,600
Likes: 49
From: Norcal/Bay Area, CA
Comes very close to a v-trim. FC3Spro has a very thorough guide. http://www.fc3spro.com/TECH/TURBO/tmodels.html
S- trim.
Rotary Rocket posted this in my thread a little while ago. I found it very useful.
8 Blade T04B:
409179-0021, 70x48.36 mm, 48 trim, S trim (37 lbs/min)
409179-0022, 70x49.50 mm, 50 trim
409179-0023, 70x51.61 mm, 54 trim
409179-0024, 70x54.00 mm, 60 trim, U trim
409179-0025, 70x55.37 mm, 63 trim, V trim (48 lbs/min)
6 blade T04B
409826-0006, 70x48.35 mm, 48 trim
409826-0012, 70x52.85 mm, 57 trim
409826-0014, 70x55.30 mm, 62 trim, V trim (48 lbs/min)
409826-0015, 70x58.40 mm, 70 trim, H trim (49 lbs/min)
Turbonetics 60-1, 76.2x59.0 mm (57 lbs/min)
Turbonetics 62-1 (60 lbs/min)
Rotary Rocket posted this in my thread a little while ago. I found it very useful.
8 Blade T04B:
409179-0021, 70x48.36 mm, 48 trim, S trim (37 lbs/min)
409179-0022, 70x49.50 mm, 50 trim
409179-0023, 70x51.61 mm, 54 trim
409179-0024, 70x54.00 mm, 60 trim, U trim
409179-0025, 70x55.37 mm, 63 trim, V trim (48 lbs/min)
6 blade T04B
409826-0006, 70x48.35 mm, 48 trim
409826-0012, 70x52.85 mm, 57 trim
409826-0014, 70x55.30 mm, 62 trim, V trim (48 lbs/min)
409826-0015, 70x58.40 mm, 70 trim, H trim (49 lbs/min)
Turbonetics 60-1, 76.2x59.0 mm (57 lbs/min)
Turbonetics 62-1 (60 lbs/min)
I wouldn't waste my time with an S-trim wheel. That'll barely outflow the stock compressor.
Also, it's much easier to just find a complete used T04b to steal parts from. A matching compressor cover can be very difficult to find by itself, and new ones go for over $200 from Turbonetics. Garrett provides almost no info on old model parts like T04b stuff.
Also, it's much easier to just find a complete used T04b to steal parts from. A matching compressor cover can be very difficult to find by itself, and new ones go for over $200 from Turbonetics. Garrett provides almost no info on old model parts like T04b stuff.
Last edited by RotaryRocket88; Jun 16, 2011 at 02:17 PM.
Trending Topics
www.turbocharged.com has good prices on turbonetics stuff. a brand new 60-1 wheel, hi-fi cover, and a matching backing plate is under $200 shipped. this would bolt up to stock turbo center
I JUST bought one of these. I sucked a nut in my t04b hybrid.
http://cgi.ebay.com/ebaymotors/Turbo...item415acab06c
http://cgi.ebay.com/ebaymotors/Turbo...item415acab06c
