tranny flush issues/questions
08-19-02, 10:24 PM
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Jul 2002
Location: Indy, IN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
tranny flush issues/questions
ok there are two drain bolts and what seems to be two fill bolts.
are u supposed to fill both or is it just one big cavity in the tranny?
the other thing is, how did you guys get the tranny fluid in there, its pretty tight.
so far i have a hose going from the engine bay to the hole. but it takes so damn long.
any ideas?
how many quarts do i need?
are u supposed to fill both or is it just one big cavity in the tranny?
the other thing is, how did you guys get the tranny fluid in there, its pretty tight.
so far i have a hose going from the engine bay to the hole. but it takes so damn long.
any ideas?
how many quarts do i need?
08-19-02, 11:33 PM
#2
...
Join Date: Aug 2001
Location: Tampa, FL
Posts: 7,539
Likes: 0
Received 0 Likes
on
0 Posts
I haven't done it yet myself but I know you can buy a pump to pump the fluid back in. Not sure on the drains or anything but I know that NAs and TIIs have a different amount of drains. I believe the TII has 2 while the NA has one but I could have it swapped.
08-19-02, 11:56 PM
#3
Full Member
Join Date: Mar 2001
Location: Pelham, AL
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
I filled both. Of course, you'll want to loosen the drain plugs first, but I'm sure you've heard that. I hope you're using something synthetic. I used redline mt-90 and my synchos are lovin' it! Don't forget to pour some into the shifter. I used a simple pump action liquid transfer pump.
Thread
Thread Starter
Forum
Replies
Last Post