Took Apart 13BT block with N/A rotors today...
08-23-02, 05:19 PM
#1
My cars louder than yours
Thread Starter
Join Date: Oct 2001
Location: Augusta, GA
Posts: 1,969
Likes: 0
Received 0 Likes
on
0 Posts
Took Apart 13BT block with N/A rotors today...
Yep, title says it, i took apart my 13BT block and it has a busted *** intermediate housing inner coolant seal tract thing. (like the track where there coolant o ring goes into is warped) and one more thing i found was kinda weird. In order for me to get the rear rotor off the e-shaft i had to tap this lil tab down on the e-shaft in order for the rotor to slide off. What do you guys think might have been the purpose of this? Thanks
08-23-02, 06:32 PM
#3
My cars louder than yours
Thread Starter
Join Date: Oct 2001
Location: Augusta, GA
Posts: 1,969
Likes: 0
Received 0 Likes
on
0 Posts
No man, it was like...they took the end of the E shaft hump and bent a lil part of it up, ill have to get pics. But, it was done intentionally to keep the rotor from coming off, beats me, i had to beat it down to get the rotor off. --shrug--
08-23-02, 06:35 PM
#4
RX-7 Bad Ass
iTrader: (55)
Something's WAY wrong there - the rotor bearing may have chewed into the eccentric shaft or something.
Dale
Dale
08-23-02, 06:40 PM
#6
My cars louder than yours
Thread Starter
Join Date: Oct 2001
Location: Augusta, GA
Posts: 1,969
Likes: 0
Received 0 Likes
on
0 Posts
nah man, you can tell it was done by a machine, i can promis you that
i can see where the machine bent/cut the lil tab up. Ill get pics so you can understand what im talking about. Hey Banzi, ill bring it over if you'll sell me that block out that sport, so long as its good (coolant/oil/apex seals..)
i can see where the machine bent/cut the lil tab up. Ill get pics so you can understand what im talking about. Hey Banzi, ill bring it over if you'll sell me that block out that sport, so long as its good (coolant/oil/apex seals..)
Trending Topics
08-23-02, 06:44 PM
#8
My cars louder than yours
Thread Starter
Join Date: Oct 2001
Location: Augusta, GA
Posts: 1,969
Likes: 0
Received 0 Likes
on
0 Posts
sounds good, im going to try to get this 4 port banging soon, but i can always use a spare engine or two around the house. I know Adam (mazdaspeed07) has a block waiting for me. But, the more the merrier, haha. PM me about directions and times about your get-together this weekend man.
08-23-02, 07:33 PM
#9
What Subscription?
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
7: Merge onto I-20 E. 161.14 miles
8: Take the SC-19 exit- exit number 18- towards AIKEN/JOHNSTON. 0.35 miles
9: Keep RIGHT at the fork in the ramp. 0.04 miles
10: Merge onto SC-19. 5.61 miles
11: Turn LEFT onto US-1 N/US-78 E/RICHLAND AVE SW. 0.19 miles
12: US-1 N/US-78 E/RICHLAND AVE SW becomes US-1 N/US-78 E. 0.09 miles
13: US-1 N/US-78 E becomes US-78 E. 15.65 miles
You come to WINDSOR. It is the town with a caboose on the right hand side of the road.
As you exit town you will see the fire dept. on your left.
Go exactly 2 miles
turn left on heritage road
go 3 miles my house is on the right
460 Beck Road
803-266-5890/1-877-698-0723
8: Take the SC-19 exit- exit number 18- towards AIKEN/JOHNSTON. 0.35 miles
9: Keep RIGHT at the fork in the ramp. 0.04 miles
10: Merge onto SC-19. 5.61 miles
11: Turn LEFT onto US-1 N/US-78 E/RICHLAND AVE SW. 0.19 miles
12: US-1 N/US-78 E/RICHLAND AVE SW becomes US-1 N/US-78 E. 0.09 miles
13: US-1 N/US-78 E becomes US-78 E. 15.65 miles
You come to WINDSOR. It is the town with a caboose on the right hand side of the road.
As you exit town you will see the fire dept. on your left.
Go exactly 2 miles
turn left on heritage road
go 3 miles my house is on the right
460 Beck Road
803-266-5890/1-877-698-0723
08-23-02, 07:34 PM
#10
What Subscription?
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM