TMIC differences
06-22-08, 03:12 PM
#1
TMIC differences
I asked a question a week or so about a "water coolered TMIC" as one of the two I had has two nippled pipes coming out the back. Well, turns out there are more differences than the AWS tubes in the USDM one.
USDM TMIC says on top
13b intercooler
Turbo II
JDM TMIC says on top
Rotary Turbo
with intercooler
The USDM TMIC is 1/2" taller from the top of the brackets that bolt to the UIM to the top of the TMIC than the JDM one; 2" tall vs 1.5" tall.
The JDM TMIC is wider too than the USDM one at ~14.5" center to center of the left and right set of mounting holes vs the JDM one at ~15".
Any ideas? I can post pictures if needed.
USDM TMIC says on top
13b intercooler
Turbo II
JDM TMIC says on top
Rotary Turbo
with intercooler
The USDM TMIC is 1/2" taller from the top of the brackets that bolt to the UIM to the top of the TMIC than the JDM one; 2" tall vs 1.5" tall.
The JDM TMIC is wider too than the USDM one at ~14.5" center to center of the left and right set of mounting holes vs the JDM one at ~15".
Any ideas? I can post pictures if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
