2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Tii doors are broken need help!

Thread Tools
 
Search this Thread
 
Old 01-29-04, 11:43 PM
  #1  
Full Member

Thread Starter
 
Join Date: Aug 2002
Location: Pennsylvania
Posts: 110
Likes: 0
Received 0 Likes on 0 Posts
Tii doors are broken need help!

87 tii, the passenger door won't open from the outside. the handle comes up but does nothing to the door.
as for the driverside door, it works fine except that it can't be locked... when locked I have to roll down the window and use a coat hanger to push down on something in the door (I don't know what it is) and open it...

any idea what it could be... I was thinking problably the little white clips in the door are broken, but I'm not sure...

any help would be great
Old 01-30-04, 12:33 AM
  #2  
Full Member

 
rx7rider87's Avatar
 
Join Date: Dec 2003
Location: Bay Area Cali
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
I had the same exact thing happen to me on the passanger door. I took of the door panel and there is a little spring on the far right that was broken on mine. I found one close to it and put it in its place and it works like a charm. Sorry I cant be more specific.. BTW i have an 87 TII too
Old 01-30-04, 01:27 AM
  #3  
s4 for life

 
13bpower's Avatar
 
Join Date: May 2002
Location: Oahu
Posts: 2,516
Likes: 0
Received 1 Like on 1 Post
Take the door panels off and take a look. What ever is wrong, it will be very obvious. There is not much to the system. The Passenger door probably broke in 2. It happens alot on our old cars. You most likely need a new/used handle.

All you need to do this is a couple screw drivers, 12mm socket and some patcients.
Old 01-30-04, 01:27 AM
  #4  
Lives on the Forum

 
RETed's Avatar
 
Join Date: Feb 2001
Location: n
Posts: 26,664
Likes: 0
Received 16 Likes on 15 Posts
Re: Tii doors are broken need help!

Originally posted by tykelley27
87 tii, the passenger door won't open from the outside. the handle comes up but does nothing to the door.
It sounds like the outside handle is broken.
http://fc3spro.com/TECH/PROBLEMS/EXT/DOOR/ohandle.htm


as for the driverside door, it works fine except that it can't be locked... when locked I have to roll down the window and use a coat hanger to push down on something in the door (I don't know what it is) and open it...
Do you have power locks?  If so, the power actuator could be seized.
If not, it could be a loose linkage.


BTW, the spring thing that rx7rider87 mention is a fix if both outside and inside door handles don't work.  I don't think it applies to this case.


-Ted
Old 01-30-04, 07:55 AM
  #5  
Full Member

 
strikland's Avatar
 
Join Date: Dec 2003
Location: Athens, GA
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
It could just be a door rod clip or something. You can pick them up at autozone for cheap. The play in the door rods is adjustable, too. I had to adjust the play in the door lock rod to get mine to lock and unlock.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Old School and Other Rotary
2
10-05-15 03:30 AM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM



Quick Reply: Tii doors are broken need help!



All times are GMT -5. The time now is 07:33 PM.