I drained my transmission oil and went to try to unscrew the side tranny bolt to add new transmission, and the god damn bolt seems like its never been removed so after trying to get the ****** bolt off i have now striped it a great deal.
I feel like a complete moron but the prob is i cant get it off and i cant drive the car with now tranny oil. All i was using for a tool was an opened ended 14mm wrench
Is there any other tool i can use that wont strip the bolt any further?? What should i do

 

well when i striped the bolt for my brakes i took a tourch and heated it up a little and it came right off
don't know if it will work on the trannny r not but thats what i would do

 

Sounds like time for vice-grips or Easy-outs

 

yup, torch and vise grip was the ONLY way mine would come out.

Be prepared to spend $1 for a new bolt from the dealer .

 

Vice grips are the way to go, Nothin else could really do it. Just make em real tight and give it a good twist

 

Soak with PB BLASTER for 1 day spraying every couple of hours

 

you're suppose to use an open end wrench after u loosin it...used the closed side to unloosen it

 

Thanks guys for the info, i actually used a vise grip the first time and now after loosing it maybe a micron i cant quite fit the vise grips in there anymore, i dont have a welder to heat it up so im gonna have to keep trying with the vise grips, closed end wrench maybe
GODDAMN TRANNY BOLT