street port template
02-07-04, 11:04 PM
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: Baton Rouge, La.
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
street port template
Does anybody know where I can get my hands on a street port template (intake and exhaust) for a 90 six port? Or, could someone be as kind enough to make me a copy of it on a piece of cardboard?
02-08-04, 08:52 AM
#4
Re: street port template
Originally posted by RotaryForce13B
Does anybody know where I can get my hands on a street port template (intake and exhaust) for a 90 six port? Or, could someone be as kind enough to make me a copy of it on a piece of cardboard?
Does anybody know where I can get my hands on a street port template (intake and exhaust) for a 90 six port? Or, could someone be as kind enough to make me a copy of it on a piece of cardboard?
02-08-04, 04:05 PM
#5
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Mazdatrix. Costs about $55. The difference between the stock primaries and the primaries on the template is HUGE. Only small changes to the secondaries and aux ports...
Using the TII exhaust on the NA should be fine, but you might want to move it "up" a little so the port opens later and closes later then it would in a turbo application. Have fun grinding out the exhaust diffusers, it will take several hours per housing. Don't use your expensive stones for this...go to the hardware store and pick up some cheap ones.
Using the TII exhaust on the NA should be fine, but you might want to move it "up" a little so the port opens later and closes later then it would in a turbo application. Have fun grinding out the exhaust diffusers, it will take several hours per housing. Don't use your expensive stones for this...go to the hardware store and pick up some cheap ones.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
