i got some stance GR+ coil-overs for my FC put them on but i can not dump the **** out of the rears.. the bottom of the rear coil-overs are spun all the way in but still i can fit 1 finger between the wheel and the wheel well, with 225/50/17's and i know they should go alot lower then that.. ? am i just retarded and don't know who to do it?




i put this on the sus. section but i figured it would get asnwered quicker in here

 

That's interesting, my GR+ Pro's (should be similar) are no where near the maximum adjustment, and I'm just about rubbing. Do you have a picture?

 

you probably got the spring stuck out of the spring perch, lift the car up and make sure the spring is sitting correctly. When you drop it back down its easy for the spring to not sit properly and it can cause spring binding so be careful.

I really hope your not thinking of driving the car dumped.

 

so in the picture that is as low as i can get both rears to go. ?

the springs are not binding i checked. and
i am not trying to dump it and then drive it, i just know it should beable to. i just want it alittle lower then what it is.


also do i do anything with the very top nut that goes on the strut? does that adjust it or anything?

 

You should be able to go much more lower than that, with my stance coilovers i could get so low that the car looks broken.

 

haha so im just a ****** idiot.. i figured it out. mod you can delete this thread..

 

what was the problem?

 

the bottom wasnt spun all the way in.. i think i win the idiot award for the year..

 

Hey at least you figured it out and they are working for you. I have had my GR+ for almost a year and love them.

 

yea im loving em. dont know why i didnt get these before the j-spec egine haha