so i just got an 87 fc tii...some questions
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Oakland, Ca
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
so i just got an 87 fc tii...some questions
i got the car today with 75,000 miles on it. the previous owner did supporting mods like
ported wastegate and turbo runners to prevent boost creep,
FCD installed to prevent fuel-cut
New gauge pods installed with boost, a/f mixture, and water temperature
New Greddy 720cc secondary injectors
New ACT clutch, pressure plate, and lightweight flywheel
New Walbro 255 fuel pump, rewired to a reliable circuit to prevent running lean
New shifter bushings
right now the car is running at 7 psi...and to get it up to about 11 psi he suggested an Rtek 2.0 and MBC...i'm brand new to the rx-7 world and i was wondering where i could purchase an rtek 2.0..and waht exactly it is.... im going to be getting a manual boost controller later this week...can u guys recommend a brand? and should i install both the mbc and the rtek 2.0 at the same time?
ported wastegate and turbo runners to prevent boost creep,
FCD installed to prevent fuel-cut
New gauge pods installed with boost, a/f mixture, and water temperature
New Greddy 720cc secondary injectors
New ACT clutch, pressure plate, and lightweight flywheel
New Walbro 255 fuel pump, rewired to a reliable circuit to prevent running lean
New shifter bushings
right now the car is running at 7 psi...and to get it up to about 11 psi he suggested an Rtek 2.0 and MBC...i'm brand new to the rx-7 world and i was wondering where i could purchase an rtek 2.0..and waht exactly it is.... im going to be getting a manual boost controller later this week...can u guys recommend a brand? and should i install both the mbc and the rtek 2.0 at the same time?
Last edited by OaklandTII; 03-23-06 at 12:38 AM.
#4
my fc broke
Join Date: Feb 2003
Location: rohnert park,CA/ bay area
Posts: 2,231
Likes: 0
Received 0 Likes
on
0 Posts
rtek is more advanced people. i would suggest you take it to get tuned by a profecinal or somthing. rtek is a chip that goes into your stock ECU. if you do a search you will find a link to there web site. its basicly like running stand alone but not. you get the chip and then this enables you to connect a palm pilot to your ecu for tunning
#5
Moderator
iTrader: (5)
also, check out www.barotary.com
We're all chill people....we have meets once a month in various locations. Keep an eye out in the west forum for meet information and ****. It would be good to have another member chill with us!
We're all chill people....we have meets once a month in various locations. Keep an eye out in the west forum for meet information and ****. It would be good to have another member chill with us!
#6
Moderator
iTrader: (5)
Originally Posted by 1SxyRXy
rtek is more advanced people. i would suggest you take it to get tuned by a profecinal or somthing. rtek is a chip that goes into your stock ECU. if you do a search you will find a link to there web site. its basicly like running stand alone but not. you get the chip and then this enables you to connect a palm pilot to your ecu for tunning
#7
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Oakland, Ca
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
thanks alot for the help guys...so you recommend going to a shop for this? you guys know any shops that would have rtek 2 in the bay...or would i have to order it offline and then have a shop install it for me?
Trending Topics
#10
OMG ITS A TRIANGLE!
Join Date: Jan 2006
Location: San Francisco
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OaklandTII
i got the car today with 75,000 miles on it. the previous owner did supporting mods like
ported wastegate and turbo runners to prevent boost creep,
FCD installed to prevent fuel-cut
New gauge pods installed with boost, a/f mixture, and water temperature
New Greddy 720cc secondary injectors
New ACT clutch, pressure plate, and lightweight flywheel
New Walbro 255 fuel pump, rewired to a reliable circuit to prevent running lean
New shifter bushings
right now the car is running at 7 psi...and to get it up to about 11 psi he suggested an Rtek 2.0 and MBC...i'm brand new to the rx-7 world and i was wondering where i could purchase an rtek 2.0..and waht exactly it is.... im going to be getting a manual boost controller later this week...can u guys recommend a brand? and should i install both the mbc and the rtek 2.0 at the same time?
ported wastegate and turbo runners to prevent boost creep,
FCD installed to prevent fuel-cut
New gauge pods installed with boost, a/f mixture, and water temperature
New Greddy 720cc secondary injectors
New ACT clutch, pressure plate, and lightweight flywheel
New Walbro 255 fuel pump, rewired to a reliable circuit to prevent running lean
New shifter bushings
right now the car is running at 7 psi...and to get it up to about 11 psi he suggested an Rtek 2.0 and MBC...i'm brand new to the rx-7 world and i was wondering where i could purchase an rtek 2.0..and waht exactly it is.... im going to be getting a manual boost controller later this week...can u guys recommend a brand? and should i install both the mbc and the rtek 2.0 at the same time?
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM